Steam Turbine Oil Purification And Filtration Machine With Vacuum Dehydrator

Brief Introduction Machine Condition: New Treatment Capacity:3000 L/H Working Pressure: ≤0.4 Mpa Place of Origin: Chongqing, China (Mainland) Brand Name: REXON OIL PURIFICATION Model Number: TY-50 Application: Turbine Oil Power data: 380V 50HZ/3 Phase Or As Required Working vacuum degree : -0.06 ~- 0.099Mpa Temperature range: 0~100ºC Best heating temperature: 50~60ºC Oil Data After Process: Impurity size after process: ≤1 micron Moisture content after process: ≤50 PPM 1. REXON TY-50 is used for treating the unqualified turbine oil, especially the seriously emulsified turbine oil. 2. REXON TY-50 can rapidly and effectively remove water, gas and impurities from oil, and it can break emulsification fast. 3. REXON TY-50 aims at turbine oil's nature of high water content, easy emulsification and high impurities content to make the oil recover the new oil's nature.REXON Turbine Oil Vacuum Purification Machine Used for Milky Oil Dehydration is used to clean substandard turbine oil, contaminated turbine oil, and high moisture turbine oil. After filtration, the turbine oil is restored to the new oil standard and can be reused. The factory can save oil by our company's machine, save oil replacement costs, and maintain equipment and machines to ensure the normal operation of equipment and machines, and extend the life of machines and equipment. Turbine oil, in high temperature working environment, it is easy to produce a lot of water pollution, and produces dissolved water in turbine oil. Such water pollutants in the oil will damage the steam turbine, fail to achieve lubrication purposes, and lead to steam turbine Not working properly. Therefore, removing moisture from the turbine oil is a top priority. Based on the above situation, REXON TY series Vacuum Oil Purifier adopts the most advanced oil filtration and purification technology, unique and efficient oil dewatering technology, and equipped with world-class brand accessories, such as Leybold vacuum pump, Schneider Electric, ABB. Motor, UK APUREDA filter, etc. Thanks to the excellent hardware support of this machine and the adoption of the world's top oil filtration and purification technology, TY-100 can efficiently complete the oil filtration and purification work, and remove a large amount of water pollutants in the oil in a short time. The polluted turbine oil meets the new oil standard, thus ensuring the normal operation of the turbine and ensuring safety. Filtration and purification of contaminated turbine fluid on a regular basis, then the oil will remain clean and meet new oil standards, then the waste oil can be repeated and recycled. At the same time, your lubricating oil equipment, steam turbine equipment, etc. will be well maintained and extended in life. Technical Parameters: Item Unit TY-10 TY-20 TY-30 TY-50 TY-100 TY-150 TY-200 TY-300 Flow rate Liters/hour 600 1200 1800 3000 6000 9000 12000 24000 Working Vacuum Degree MPa -0.06 ~-0.095 Working Pressure MPa ≤ 0.3 Temperature Range ºC 20 ~80 Water content PPM ≤50 Impurity content μm ≤5 Gas content % ≤0.1 % Cleanness NAS ≤6 grade (NAS1638) Demulsification value min ≤15 (GB/F 7305) Power Supply 3 Phase, 50 Hz, 380V (or as per requirement) Heating power kW 12 15 18 24 45 60 72 84 Total power kW 14 17 20 27 48 66 81 97 Inlet/outlet caliber mm 25 25 25 32 42 50 50 60 Weight kg 400 450 500 600 700 900 1050 1550 Dimension Length mm 1280 1350 1350 1400 1500 1500 1600 1800 Width mm 750 900 950 950 1000 1200 1350 1400 Height mm 1450 1450 1500 1600 1650 1800 1800 1850 Welcome contact us for more details! WWW.REXONOP.COM / WWW.PURIFYOIL.COM M: +86 13883257313 / E: ,