Redispersible Polymer Powder - VAE-RDP

Redispersible Polymer Powder - VAE-RDP RDP is used as independent and additional adhesive in glue joints. For modification of dry building mixes on plaster and cement basis.Redispersible polymer powder on the basis of vinyl acetate polymer and vinyl ether , which has polyvinyl alcohol as protective colloid. PRODUCT DESCRIPTION Appearance White or off-white powder Particle size 80 Density g/cm³ 500±100 Ash Content % 12±2 PH ( 25-30℃） 7-9 Residual moisture % ≤2 Minimum film formation temperature 4℃   Application ● Gypsum / Cement / Mortar systems ● Movable/Regular mortar for thin coating ● Plaster boards / Gas-concrete block adhesives ● Wall/floor tile adhesive ● Open/closed-textured tile adhesive ● Plasters, fillers and finishing compounds ● Repair compounds for cracks filling and thin coating surface smoothing ● Repair compounds for finishing and leveling of concrete surfaces ● Polymeric alloys for grouting and cracks filling ● Water resistance / Grouting compounds ● Filling and embossing compounds ● Cement self-leveling flooring compounds   Advantage ● Dry strength / Durability / Lifetime increasing ● Mixture stability improving ● Water demand rate / bleeding reduction ● Air pore uniform distribution over volume ● Impact bending / Abrasive / Flexural strength increasing ● Temperature changes resistance ● Shrinkage reduction ● Adhesion/Cohesion increasing ● Stress cracking resistance increasing ● Provides high final strength ● Water retention improving ● Provides properties stability during different cements usage   Packing & storage Packed in 25 kg valved multilayer paper bags Guaranteed shelf life in closed and undamaged package It should be protected from sun and rain, fire, moisture, static electricity, open flame and sparks when transportation and storage. This information is based on our present state of knowledge.It is intended for public introduction of our products and their uses. This description should not be construed as a guarantee of the products specific properties or serviceability for a particular application. We invite you to assemble a request encompassing both technical data and product samples for our consideration. This collective information can subsequently be submitted to us directly.