Full Model PE Series Jaw Crusher Machine PE400X600, PE500X750, PE750X1060, PE1060X1200, PE1200X1500

Full model of jaw crusher Jaw crusher is mainly used as coarse crusher and medium crusher in mining, building materials, infrastructure and other departments. According to the width of the feeding port, it is divided into large, medium and small machines. Large machines with the feeding port width of more than 600mm, medium machines with the feeding port width of 300-600mm,small machines with the feeding port width of less than 300mm. Technical parameters of jaw crusher Jaw crusher features: 1. The jaw crusher cavity is deep and there is no dead zone, which improves the feeding capacity and output; 2. The crushing ratio is large and the product size is uniform; 3. Gasket-type discharge opening adjustment device is reliable and convenient, with a large adjustment range, which increases the flexibility of the equipment; 4. The lubrication system is safe and reliable, the replacement of parts is convenient, and the maintenance workload is small; 5. Simple structure, reliable work, low operating cost; 6. Equipment energy saving: single machine energy saving 15%～30%; 7. The adjustment range of the discharge opening is large, which can meet the requirements of different users; 8. Low noise and less dust. Maintenance of machine： (1) The lubricating grease used for jaw crusher shall be determined according to the place of use and temperature conditions. Generally, calcium base, sodium base and calcium sodium base lubricating grease shall be used. (2) Generally, add 50-70% lubricating oil into the bearing and replace it every 3-6 months. Clean the bearing raceway with clean gasoline or kerosene during replacement. (3) Before starting the jaw crusher, a small amount of lubricating oil shall be injected between the elbow plate and the elbow pad.