MS Corrugated Cardboard Production Line Corrugated Cardboard Machine For Sale

Working Principle: Tile line is the abbreviation of corrugated cardboard production line.It is a streamline line consisting of pressing, corrugating, gluing, bonding, grading, paper making, and code output. Such as single corrugated paper production line is made of web frame, single- sided corrugated cardboard machine, composed of rotary paper cutting unit, using web material and potato or corn starch adhesive, single-sided corrugated board continuous production and cut into the required specifications, production of cardboard no longer dry or dry, and glue machine or laminating machine with the use of, can produce more than three layers of corrugated cardboard.   Equipment configuration and technical description   name quantity remarks Hydraulic reel stand 5 set 1.Multi-point brake, hydraulic drive lift, left and right translation, medium. 2.The guide rail length 6000 mm, the trolley adopts 10 mm medium plate welding. Paper bike 10set Single Paper preheating machine 4set Roller ￠800 mm,including pressure vessel certificate. Electric adjustment package angle. The wrapping angle can adjust the heating area of paper within 360 range Adsorption Single facer machine 2set Corrugated main roller ￠320 mm,material using tungsten carbide. Imported main bearing,PLC automatic glue control,man-machine interface touch screen,paper break automatic stop pressure relief,steam heating mode Triples preheating machine 1set Roller ￠800 mm,including pressure vessel certificate. Electric adjustment package angle. The wrapping angle can adjust the heating area of the paper in the range of 360. Double gluing Machine 1set Cots 268 mm. diameter Each layer of independent frequency conversion motor drive, PLC adjust the glue clearance and man-machine interface. Transport Bridge 2set Main beam 200 mm channel steel, independent frequency conversion motor drive paper transfer, adsorption tensioning. Electric correction Double sided  machine 1set The frame 400 mm national standard channel steel,chromium plating hot plate 600 mm *14 block,the entrance ￠mm hot cylinder causes the surface paper to raise the temperature extremely fast 6 groups to touch the whole process pressure plate design structure. PLC automatic control pressure plate. Temperature display,frequency conversion motor.400   Type electric slitter scorer  machine 1set 10 scourer and 6 slitter Tungsten alloy blade, six-knife ten-wire type, electric row knife, electric lift left and right movemen Computer NC-cut off machine 1set Full AC Servo Control, Energy Storage Brake, Spiral Knife Structure, Oil-immersed Gear Drive Sheet transfer conveyor system 1set Imported high strength belt output, paper side standard conveyor Rubber station system 1set Pipeline customer self-provided. The device consists of carrier tank, main tank, storage tank, rubber pump and rubber pump.  Air supply system 1set Steam components including piping valves, trap valves, meters, etc. in equipment, customer-owned heat source and piping Electrical control cabinet system 1set Electronic control system: adsorption single-sided machine, driving part, electric thin knife machine, double-sided machine, glue coating machine all adopt frequency conversion motor, Delta frequency conversion control system. The operation interface is simple and convenient, the speed display control cabinet is equipped with each unit speed display, the unit calls, the emergency stop function.  The main relay adopts French Schneider famous brand products.  vapour system 1 set Steam components including piping valves, trap valves, meters, etc. in equipment, customer-owned heat source and piping   Main technical parameters and requirements of production line   Maximum production 1400mm   Design Production Speed 180m/min Three-tier working 100-150m/min   Five-tier working 80-120m/min Precision of Longitudinal Cutting Paper mm ±1   Cross cutting accuracy mm ±1 The above speed index shall be up to: production width of 1400 mm, meet the following paper standards and ensure that the surface temperature of the heated parts of the equipment is 175℃. Table 2 Surface paper indicators g/㎡100-180 g/㎡ ring pressure index (N.m/g)≥8(moisture content 8-10%) g/㎡100-180≥(N.m/g) Core paper indicators g/㎡80-160 g/㎡ ring pressure index (N.m/g)≥5.5(moisture content 8-10%) g/㎡80-160 g/㎡(N.m/g),5.5(moisture content 8-10%)  Paper finger g/㎡90-160 g/㎡ Ring pressure index (N.m/g)≥6(moisture content 8-10%) g/㎡90-160 g/㎡(N.m/g)6(moisture content 8-10%) Flute type combination   Steam requirements  maximum pressure16kg/cm2 wirking pressure 10-12kg/cm2  dosage4000kg/Hr    Electricity AC380V 50Hz 3PH Installed capacity ≈250 KW The common power ≈150 KW    compressed air 9 kg/cm2 maximum pressure Common pressure kg/cm2 4-8 Amount m3/min 1    space usage ≈Lmin85m*Wmin10m*Hmin5m     Hydraulic reel stand Structural characteristics：  ★ use full hydraulic drive to complete the base paper clamping,loosening,moving to the middle,left and right translation and other actions,the base paper lift using hydraulic drive.  ★ brake adjustment adopts multi-point brake system.  ★ each paper rack with two paper cars from both sides can be paper at the same time. Technical parameters：  range： maximum 1400 mm minimum 1000 mm 2、 diameter： maximum 1300 mm minimum 350 mm 1  paper frame spindle diameter ：￠240 mm 4、 gas source working pressure (MPA):0.4-0.8 MPA  Equipment Size： Lmx4.3*Wmx1.8*Hmx1.4 5 6. unit weight： maximum Kg 4000   Hydraulic system parameters：  Working pressure (MPA):16-18 MPA 2, lift hydraulic cylinder :￠100×440 mm  Tightening hydraulic cylinder ：￠63×1300 mm 4、 Hydraulic station motor power ：3 KW --380V --50Hz  5, Solenoid valve voltage： V 50Hz 220   Main purchased parts, raw materials and origin: Main Name producing area Material Type  main axle  Tin Steel Production  242mm diameter  swing arm  Production  HT200Resin sand cast iron  wallboard  Jigang Q235A Welded Parts  bearing Ha, Wa, Lo   Tooth paper clip Xu Sheng, Zhejiang 3.4 inches Main electrical appliances  France Schneider    push-button Zhengtai NP2 Series    air switch France Schneider    pneumatic component Sonno, Zhejiang    hydraulic pressure station Shandong Zaozhuang    Brake pump  Zhejiang     Structural characteristics：  ★ track is completely buried,the main frame is 140 channel steel welded with ￠20 mm cold drawn round steel,the track length is 6000 mm.  ★ each paper rack with two paper cars from both sides can be paper at the same time. Push the reel in place. Main Outsourced Parts, Raw Materials and Origin: Main Name Brand or origin Material Type Track and Paper Truck Tanggang or Jigang 14 channel, Q235A、 steel  bearing Ha, Wa, Lo     We are pleased to deliver Corrugated Cardboard Production Line, Corrugated Cardboard Machine. Safe payment and on time deliver time will give you.Our company specializes in the production of corrugated cardboard production lines, carton production lines, we provide customized services, come to consult us!