High Density Polyethylene Sheets/HDPE Liner

High Density Polyethylene (HDPE) geomembrane liners are used in a wide range of containment applications. Available in smooth, textured, white, conductive and high temperature variations, this material provides excellent durability and chemical resistance properties and is reliable in exposed applications, offering great ultraviolet protection and ageing resistance from the intense stresses of weather. HDPE geomembranes are available in a variety of surface finishes including textured, smooth and conductive. Textured finishes provide higher friction angles to prevent slippage of adjacent materials when lining steep slopes while smooth geomembranes are the preferred products for lining projects requiring low permeability. Due to the relative stiffness of HDPE, field seaming by Nilex's trained geomembrane installers is generally required. Tinhy Geosynthetics HDPE liner specifications Tinhy Geosynthetics HDPE liner technical datas Product High quality HDPE liner film, HDPE geomembrane Standard GM13-smooth Certifitcation CE/ISO/BTTG/TRI Thickness 0.2mm-3.0mm Technology Blowing Width 2m-10m Material HDPE/LDPE/LLDPE Length 50m-100m Original China Tinhy Geosynthetics HDPE liner Product Features  §  Excellent physical and mechanical performance §  Excellent drainage effect  §  High tearing resistance    §  High puncture resistance  §  High aging resistance     §  High UV resistance  §  Anti-acid&alkali         §  High chemical and Hydrocarbon resistance.  §  high and low temperature resistance   §  Long working life  §  Hydraulic pressure resistance   §  High tensile strength  §  High strength       §  Non-poisonous Tinhy New Materials HDPE liner Projects Applications & Environmental Projects Hazardous Waste Disposal Site*Domestic Waste Landfill*Flying Fly ash landfill *Mining Tailings storage*Power Plant Ash Dam*Oil Tank*Evaporation Pond *Artificial Wetland*Intensive Livestock*Avian Breeding* Intensive livestock and poultry farming* heap leach pads & Building construction Projects Plant roofing * underground garage roofing *underground building side wall * floor*Golf course & Aquaculture and Agriculture Projects Reservoir *canal * river *watershed management *fish and shrimp pond * lotus pond*swimming pool & Traffic Projects High-speed rail *subway * railway * highway*Tunnel Smooth HDPE geomembrane-GM13(ASTM) technical data Properties Test Method Test Value 0.75 mm 1.00 mm 1.25 mm 1.50 mm 2.00 mm 2.50 mm Thickness (min. ave.)· lowest individual of 10 values D5199 nom -10% nom -10% nom -10% nom -10% nom -10% nom -10% Density (min.) D 1505/D 792 0.94 0.94 0.94 0.94 0.94 0.94 yield strength D 6693 11 kN/m 15 kN/m 18 kN/m 22 kN/m 29 kN/m 37 kN/m break strength 20 kN/m 27 kN/m 33 kN/m 40 kN/m 53 kN/m 67 kN/m yield elongation 12% break elongation 700% Tear Resistance (min. ave.) D 1004 93 N 125 N 156 N 187 N 249 N 311 N Puncture Resistance (min. ave.) D 4833 240 N 320 N 400 N 480 N 640 N 800 N Stress Crack Resistance (2) D 5397 300 hr. Carbon Black Content - % D 4218 2.0-3.0% Oxidative Induction Time (OIT) (min. ave.)               (a) Standard OIT D 3895 100 min. (b) High Pressure OIT D 5885 400 min. Oven Aging at 85°C               (a) Standard OIT (min. ave.) - % retained after 90 days D 3895   55% (b) High Pressure OIT (min. ave.) - % retained after 90 days D 5885   80% UV Resistance               High Pressure OIT (min. ave.) - % retained after 1600 hrs D 5885   50% Contact: Betty WhatsApp:+8613153147202