Snow Sweeper

Brief introduction: It integrates snow pushing, snow sweeping and snow blowing. It is used to remove ice and snow on runway, taxiway and apron of airport.   Snow removal mode: front is snow blade, middle is brush and rear is blower. The three snow removal modes can work together or independently.   The chassis can be Mercedes Benz, heavy truck and other four-wheel drive chassis.   Features of snow sweeper 3200 ★High snow removal efficiency, which can quickly remove the snow on airport pavement, taxiway and apron;   ★High cleanliness of snow removal, which can meet the road requirements of normal takeoff and landing of aircraft;   ★The snowboard adopts mechanical spring type obstacle avoidance mechanism, high wear-resistant polyurethane snow scraper, and rolling brush adopts steel wire and polypropylene mixed bristles, which can avoid damage to airport pavement and pavement facilities;   ★The power system, hydraulic system and electrical control system are equipped with mature accessories of international famous brands such as Cummins, Parker, Linde, Eaton, etc., which ensure the snow sweeper has superior vehicle performance;   ★The emergency protection is equipped; the equipment can be quickly evacuated from the operation site in case of breakdown;   ★The vehicle has integrated electronic control system, the rear axle has follow-up steering function, can steer following the front wheel, can be flexible in a small turning radius, even in high-speed turning, the hydraulic control of the steering structure can also ensure that the snow brush along the track of the snowboard;   ★The volume of fuel tank is 833 L to ensure uninterrupted operation of the equipment;   ★The volume of the hydraulic oil tank is 227 L to ensure that the cooler is always kept at the working temperature;   ★The brush is driven by a single motor, with a diameter of 1.168 m and a width of 5.5 M. It can be selected by users with a width of 4.88 M;   ★The snowboard is a segmented structure with independent obstacle avoidance function, with a width of 6.6m, six sections, single section width of 1.1m.  Snowboard with 5.5m five sections for users to choose;   ★The planetary gear box with compact high torque drives the hydraulic motor to drive the snow brush; ★The floating ball bearing brush coupling device can ensure the excellent grounding connection performance of the snow brush even on the irregular pavement;   ★The rear of the vehicle is equipped with a double centrifugal blower (or single centrifugal blower), with a maximum speed of 3000 r / min, which is used to remove the residual floating snow or shallow snow;   ★The wholly integrated electronic control system can provide the following functions: -According to the wear degree of brush hair and the speed of snow sweeper, the snow sweeper grounding pressure can be adjusted automatically or manually; -Automatic adjustment of snow sweeping characteristics or manual adjustment of snow sweeping characteristics; - Control display with multiple language options; - In the cab of tractor, all functions of snowboard, snow brush and blower can be fully controlled, including linkage control and individual control; - It has self-diagnosis and is convenient for troubleshooting.   Technical parameters Chassis   Type: sino truck ZZ2147N5227E1, 4×4  Main engine:Sion truck D10.34-50, rated power is 249 kw, state V emission  Control display language:multiple language choices  Climbing ability≥25%  Minimum turning radius (outer diameter)≤11.2 m Snow Blade  Width: 6.6 M or 5.5M  The Maximum Working Angle: ±32 ° Brush  Driven motor: single motor  Diameter: 1.168 M  Brush Material: half polypropylene, half steel wire mixed  Length: 5.5 M  Working Rotation Rate: 0-690 RPM  The Maximum Snow Brush Deflection Angle: ±45°  Blower   Type: Centrifugal fan type, driven by single motor  Blast Capacity≥100125 m³/h  Wind Speed: 78-102 m/s Rotational speed:  0 – 3000 rpm It is located at the rear of the tractor axle Auxiliary Engine  Brand: Cummins QSL8.9  Type: turbocharged water-cooled diesel engine meets state V emission  Power: 375 HP / 276 kw  Working rotation rate: 2100 RPM Operational Performance   Maximum Working Speed: 40 Km / h  Sweeping Track Width (When the deflection angle is 45°): 4.743 M  Maximum Snow Removal Capacity (When the deflection angle is 45°): 343556 M²/h  Hydrostatic System: brush and snow blower system are driven by independent special hydrostatic transmission system, which can realize stepless change from 0 to maximum speed.