High Efficiency Self-cleaning Screen

High efficiency self-cleaning screen Technical Parameter   Process: pouring /injecting Holes/Perforation/Aperture diameter: 0.35-50mm or as per your requirement Aperture type: square ,rectangular , round or OEM Wire diameter:1.6mm-5mm or OEM Wire material : S.S, Mn , Steel etc Edge material: Polyurethane Screen size : 305* 610, 610* 610, 1200x1800 mm or OEM Installation: Inlay, hanging and others Usage: mining plant, coal washing plant, quarry etc     Merits/Advantages   1 Excellent anti-blockage performance . As the wires are separate with each other , it allows that each wire can slightly shake when the sieving machine works , so that the fillings on the screen can be easily removed and dropped off through each aperture by the good shaking principal, finally without remains left on the screen panel.   2 The highly efficient sieving performance , most can reach to 80% of sieving efficiency , some models can reach to almost 90%.   3 Great flip-flow performance , when it works together with vibrating sieving machine , the flip flow effect can be equal to that of flip-flow screen.   4 The open area is 30% higher than that of the traditional woven screen , which further improves the usage of screen area .   5 The obvious improvement of capacity and output , its capacity is 30% higher than that of the traditional one and 40% higher output compared to the traditional one .   6 Long life span , it is 3 times longer wear life than that of traditional woven screen because of its comprehensive performances mentioned above . Most can be used for 3-6 months , some can reach more.   Actual operation result feedback from one of our big domestic customers ---- CHN energy, a famous coal washing plant   1  After replacing the tradition screen with our this renewed self-cleaning screen , the total annual amount of coal washing has increased by 0.452 M tons.   2  The profit have increased a lot , the improved space is almost to RMB23M .   3  Various cost has reduced a lot . After using it , every day’s production time has contracted almost 3 hours , causing the electricity cost is reduced accordingly ( up to 1.52M RMB cost saved)   and the abrasion degree of machines is lower , to further protect the machines .