3W PIR Sensor Light LED Cabinet Light,wireless Motion Sensor Automatically Turn On With Magnetic And 3M On The Back

3W PIR sensor light LED cabinet light,wireless motion sensor automatically turn on with magnetic and 3M on the back Brief Introduction: This LED light is te newest version on the market,it is a combination of two sensor modes,Only Motion sensor and Motion & Light Sensor,which adopts te wireless motion sensor(PIR) technology,automatically turn on when motion is detected within sensing range in dark place and automatically turn off after 20 seconds of no motion,or also just detect motion,then it will automatically light on.Perfect for your bedroom,stairs,hallway,kitchen,closet,cabinet,wardrobes or other dark places. Function: 1.Always On Mode:Light for the long light state,the equivalent of flashlight lighting 2.Motion & Light Sensor Mode:Under dark enough condition,automatically powers on when motion s detected within 3 meters,automatically Powers off after 20 seconds of inactivity. 3.Only Motion Sensor Mode:Automatically powers on when motion is detected withn 3 meters,aotumatically powers off after 20 seconds of inactivity.Not only powers on in dark,but also in daytime. 4.Easy to install:No tools or screws to install,stick directly by 3M adhesive and magnetic strip. 5.Power supply:Built-in lithium battery,can be charged directly by USB cable. 6Long Serving life:Ultra-high conversion efficiency make this light's battery life is longer than normal light,offer 80,000hrs serving life,needn't to change led light. Switch Description: A:Long Press introduction 1.Mode 1(Always On):Long Switch about 2 seconds to turn on the light and it is the Always On Mode. 2.Mode 2(Motion &Light Sensor):After turn on the light,short pres switch,green indicator flash for 1 second,it is the Motion & Light Sensor Mode. 3.Mode 3(Only Motion Sensor):Short press switch twice,red indicator flash for 1 second,it is the Only Motion Sensor Mode. 4.Short press switch repeatedly,Mode 2 and Mode 3 will be chosen repeatedly. 5.Mode 4(OFF):Long press switch about 2 seconds to turn off the light. B:Short Press Introduction 1.Mode 1(Motion & Light Sensor):Short press switch to turn on the light,green indicator flash for 1 second and it is the Motion & Light Sensor Mode. 2.Mode 2(Only Motion Sensor):Shor press switch twice,red indicatior flash for 1 second,it is the Only Motion Sensor Mode. 3.Short Press switch repeatedly,Mode 1 and Mode 2 will be chosen repeatedly. 4.Mode 3(OFF):Long press switch about 2 seconds to turn off the light. 1.USB Port 2.PIR Sensor 3.Light Sensor 4.Switch 5.Install Plastic Bracket Precautions: 1.Do not install the light in wet,high temperatures or vent place to avoid affect the normal use. 2.Do not charge more than 6 hours. 3.This light built in lithium battery,in order to ensre the normal use,when finding LED dimmed ,please charge it. 4.Under Motion & Light Sensor Mode,please put the light in totally dark area,in this case the sensor will be very sensitive,otherwise it may influence the light's sensitivity. Contact Person:Lila Wang Skype:wangyanyun96906 QQ/Wechat:544363079 Mob/Whatsapp:15814085680 3W PIR sensor light LED cabinet light,wireless motion sensor automatically turn on with magnetic and 3M on the back