Gr9 Titanium Eccentric Reducer

PRODUCT DESCRIPTION Gr1 Gr2 Gr5 Gr7 Gr9 Titanium Reducer Titanium Pipe Fittings For Industry Reducer is an indispensable part for connecting pipes of different sizes and diameters in pipeline equipment.Its varieties have Concentric Reducer R(C) and  Eccentric Reducer R(E).When the flow of fluid in the pipeline changes, such as increase or decrease, and the flow rate requirements do not change much, reducing pipe should be used. At the inlet of the pump, reducing pipes are needed to prevent cavitation.And meters, such as flow meter, regulating valve joint, in order to match with the meter joint, also need to use reducing pipe. Processing method: The shrinkage forming process of the big head is to put the tube blank equal to the diameter of the big end of the big head into the forming die, and press the metal along the axial direction of the tube blank to move along the cavity and shrink forming. According to the size of reducing tube, it can be divided into one pressing forming or multiple pressing forming. Production process: push system, pressing, forging, casting and so on Non-Destructive Tests:Ultrasonic test ,Radiographic Examination,PMI Test,Penetration Test,Diamension Examination ,Surface Examination ,Hardness Examination  Destructive Tests:Matallographic Examination ,Intergranular Corrosion Test,Grain Size Test,Mechanical Property Test,Tension Test,Bending Test,Impact Test. Application :Widely used in natural gas, electric power, petroleum, chemical, industrial, pharmaceutical, pressure pipeline and so on DN(Size) 20*15mm-1150*1050mm A (Outside Diameter )D1 26.9mm-1168mm A (Outside Diameter )D2 21.3mm-1067mm Length 38mm-711mm B(Outside Diameter )D1 25mm-1120mm B(Outside Diameter )D2 18mm-920mm Length 38mm-711mm Material  Titanium Gr1 Gr2 Gr5 Gr7 Gr9  Standard  GB/T 27684 ASTM B363 ASTM B862 HG/T 20592  Surface  Sand blast  Tag:concentric reducers,reducer pn16,Titanium reducer Sand blast