Quick Details
- Processing Time:3-6 months
- Port:Tianjin
- Supply Ability: 500000000 Square Meters Per Month
- Place of Origin:China
- Model Number:02
- Brand Name:DCI
- Brand Name:DCI
1. Annual output:
5million to 30 million sqm(based on thickness of 9.5mm gypsum
board)2. Working time: 24hours/day and 300 working days/year
3. Raw material: Gypsum powder, shielding paper, modified starch, foaming agent,
glue4. Fuel: Natural gas, diesel, heavy oil or coal
5. Product quality and specification:1) The product is in compliance with National Standard
GB/T9775-20082) Product specification:Length: 2400mm~3600mmWidth: 1200mm or 1220mmThickness: 8mm-20mm6. Main process:1)Raw material blending;2)Shaping;3)Wet board/panel conveying;4)Drying;5)Dry board/panel conveying;6)Finished product stacking and storage.
7. Main technology:The production line adopts special designed hot air stove heating
system8.Raw material consumption list:(Based on 9.5 mm gypsum board for reference)
Gypsum
6.8kg/m2
Shielding paper
0.48kg/m2
Modified starch
0.035kg/m2
Foaming agent
0.008kg/m2
Glue
0.005kg/m2
Fiberglass(optional)
0.025kg/m2
Electricity
0.3kwh/m2
Water
4.8kg/m2
Light oil
1,000,000kcal/hour
Natural gas
0.45m³/m2
Till now, we've manufactured and supplied complete sets of
machine lines to Russia, Oman, Uzbekistan,United Arab Emirates, Iran.
Payment conditions:30% (USD) prepaid by T/T as down payment;70% by irrevocable L/C at sighta).65% shall be paid against shipping documents at sight.b).5% shall be paid against performance guarantee at sight.What's more , Kunlun bank account available to make convenient for Iranian
clients
Production Method of Gypsum Board Production
Line:This production line used the calcined gypsum powder, water and
various additives are automatically and separately measured and conveyed into the mixer by continuous auto-conveying system. After well mixed into slurry and spreaded onto the gypsum board
protective paper which is continuously moving forward. During the progressing process, the slurry is gradually dispersed with vibration, and jointed with back protective paper. When going
through extruded shaping machine, the slurry is fully wrapped by upper and lower paper, pressing into well-regulated flat board which is continuously brought forward as per a stable and strictly
controlled speed. After any minutes , the calcined gypsum in the slurry is hydrated again and crystallized into tiny interpenetrative dihydrate gypsum crystal with higher strength. And then, the
wet gypsum board with a certain strength and regular shape is precisely cut into individual boards with set size by an auto-controlled cutting system. The individual boards are orderly arranged,
turned over by program control system and brought into the dyer. In the dryer, the absorbed water in the boards is evaporated away. following strict drying system(The crystal water in the gypsum
crystal has no loss). After brought out from the dryer, the boards are gradually cooled down in the running process. The front sides of every two boards are folded after turned over again, and
the two ends are cut into boards with regular size and nice appearance by end sawing machine. And finally the boards are conveyed to automatic stacking machine and stacked into well-ordered
finished products before put into storage.
Labor sanitationSafety designSafety design for factory areaThe factory road traffic design and outdoor fire hydrant arrangement will be in
conformity with every requirement in "Achitectural Design Fire Prevention Norm"; The pavements and driveways are smooth, unblocked, and there are enough lighting facilities at night; Set covers
over the draniage ditches in the factory; Make it easy to go through, discharge, convenient and safe; at the same time do virescence in the whole factory to reduce the dust and
noises.Safety design for workshopIn the workshop, certain safe distance must be left for the main passages and
operating passages, between equipments and the building, between equipment and equipment, and between equipment and passages; Set guard rail on all workbench edges; Set covers over drainage
ditches; Lighting is enough in the workshop; All electrical equipments have ground protection, and there is overhauling power of 36V to ensure of overhaul safety.Harmful factor in producing:Variety of harmful substance: Noises from fan, air compressor,
etc.Measures to reduce harmful factors: Do best to select low noise equipments to
reduce the noise from sound source, and meanwhile add anti-vibration soft connectioner and muffler on the fan.Precautionary measures of safety and
sanitationProtective appliances shall be allotted to each worker according to real
working conditions; All equipment is managed by certain person, the detailed operational procedure shall be made. Workers on duty must carry on safety education and corresponding skills training;
strictly operate according to operation procedure to ensure the person's security and equipment's good condition; Regularly carry on safety education to staff; Regularly organize safety inspecton
to dispel the accident potential in time.ExplosionproofExplosive materials are not produced and discharged in the production workshop
of this project. There is no factor of explosion.Fire fighting systemOur equipment is not easy to produce fireworks, so don't need any corresponding
fire detection device.After Sale ServiceDCI is pleased to provide the parts,knowledge and expertise to assist with all
your plant's maintenance and upgrade needs.We can supply as below:Spare Parts:All Rollers and ShaftsMixer PartsForming Plate PartsSaw Blades Forming Belts/Conveyor BeltingCarbon BearingsDryer SprocketsChainChain GuidesHead/Tail PulleysPlat Belt Drive PulleysFilter BagsRaw MaterialModified StarchPaperFoaming AgentGlueEdge TapeFiberglassWhite TapeTechnical SupportDCI's guarantee is within 1 year free after delivery and long-term
serviceDCI can help u to modify equipment and increase production
capacityDCI can help u solve any problems related to the gypsum
equipmentDCI,the gypsum machinery expert,your best choice!