Titanium Alloy Vacuum Debinding And Sintering Furnace Metal Injection Moulding Parts

Product Description______________________________________________ Description Vacuum debinding and sinter furnace is mainly suitable for debinding and sinter process of tungsten alloy, heavy alloy, moly alloy, titanium alloy and cemented carbide materials. The vacuum debinding sitering furnace is used for PEG, paraffin and rubber binder removing. It can also do vacuum sinter, partial pressure sinter and minor pressure sinter processes. Technical Features  1. Special designed debinding muffle is adopted with good sealing and complete bind removable, preventing inside components pollution.  2. It has functions of slow vacuum, vacuum pre-sinter, minor negative pressure debinding, TOWAC debinding and minor positive pressure debinding. 3. The furnace adopts advanced refractory structure and materials, which features good insulation performance and less heat absorption. It can save more than 20% energy compare o previous design.  4. Vacuum debinding and sinter furnace works by using touch screen operation and PLC central control, which makes the operation simple and reliable. 5. The vacuum debinding sitering furnace uses special hot zone structure and heating element design, assuring good temperature uniformity. 6.The furnace has the functions of over temperature and over pressure fault alarm, mechanical automatic pressure protection and interlocking, which forms a highly safe furnace. 7. It has remote control operation, remote malfunction diagnosis and remote program update functions. Optional Configuration of Vacuum Debinding and Sinter Furnace 1. Furnace door: hinge turning type, manual tight/auto lock-ring tight 2. Furnace vessel: All carbon steel/Inner layer stainless steel/Total stainless steel 3. Furnace hot zone: Soft carbon felt+Hard composite felt/all hard composite felt  4. Heater material: isostatic press graphite 5. 5.Muffle material: fine size graphite/ isostatic press graphite 6. Process gas control: Volume/mass flow-meter, manual value/auto value, Foreign brand/Chinese brand 7. Vacuum pump and gauge: Foreign brand/Chinese brand 8. Load truck: roller type/fork type  9. Operation panel: simulation screen/touch screen/industrial computer 10. PLC: OMRON/Siemens 11. Temperature controller: SHIMADEN/EUROTHERM  12. Thermocouple: C type(tungsten sheath/Moly sheath/ceramic sheath) 13. Recorder: Paperless recorder/paper recorder, Foreign brand/Chinese brand 14. Electric components: CHINT/Schneider/Siemens Specifications of Vacuum Debinding and Sinter Furnace SpecModel VDSF-030306 VDSF-040408 VDSF-040415 VDSF-050520 Working Zone Size W×H×L (mm) 300 × 300 × 600 400 × 400 × 800 400 × 400 × 1500 500 × 500 × 2000 Max.Weight(kg) (not mean actual load weight) 100 200 400 900 Max.temperature (°C) 1550 1550 1550 1550 Temperature Uniformity (°C) ±4 ±4 ±5 ±5 Heating Power (kW) 75 90 120 220 Ultimate Vacuum (Pa) 1 1 1 1 Pressure Increase Rate (Pa/h) ≤0.67 ≤0.67 ≤0.67 ≤0.67 Debinding gas Ar/N2/H2 Ar/N2/H2 Ar/N2/H2 Ar/N2/H2 The above parameters can be adjusted to the process requirements, they are not as acceptance standard, the detail spec. will be stated in the technical  proposal and agreements.