Quick Details
- x-fold packaging machine:makes the packaging in the envelope type form from the edges and adds easy open unit
- Processing Time:30 days
- Port:Mersin or Istanbul Port
- Supply Ability: 8 Units Per Month
- Brand Name:GİRİSİM MACHINERY
· The machine is designed
for the packaging of flat products (biscuits, wafer, corn crisps, soap, etc.) in a package with flat side faces in the envelope-type form. This type of package allows to place the goods on
store shelves as lying down and standing up.
· 3.000 mm. product feeding
conveyor is used and it is double-palletised.
· The intervals of the
pallet on the feeding conveyor is adjusted to the any product's dimensions.
· There is a PLC electronic
control system on the machine allowing that every parameters on the machine including heat, temperature, speed, dimensions of the product to be packaged, etc. might be electronically
controlled through 7.4 inch touch screen operator panel.
· The operator menu
is prepared in different languages depending on the customer's request.
Optional
Equipments:
· Servo System Application
on the packaging machine
· Servo System
Semi-Automatic Product Feeding Line
· Inner Packaging Material
Application for better protection
· Coding Machine
· Self-Adhesive Labeling
Machine
1. Servo
System Application on the packaging machine:
The machine
might be produced with servo engine system. The advantage of this system is that the length of the packaging material drawn by the forceps (the required length of heat-sealable film from a
roll) is controlled electronically through touch screen operator panel. When you have different dimensions of products from the view of width and height, then the length of the packaging
material that should be taken by the forceps changes. In normal machine, this length is adjusted mechanically through the cams while this is electronically controlled through the touch screen
operator panel in case of servo engine application. The usage of servo system is highly advised to our customers in case that they have products with too many different dimensions.
2. Servo
System Semi-Automatic Product Feeding Line:
The feeding
of the products is applied manually by hand to the intervals located on the transporter of the machine. Depending on the customer’s request, the semi-automatic product feeding system might be
adapted to the overwrapping packaging machine and the product feeding system and the packaging machine work in synchronization. The main properties of the semi-automatic product feeding
system:
· The channels used for the
feeding of the products might be done as single or double channel so it is possible to receive one-row or two-row products in one package.
· The flow of the
product on the channel is to be realized with the help of the vibration system. The flow of the product on the channel is to be supported with the defined certain level of angle between the
packaging machine and the feeding system.
· The feeding of the
products to the channels is done manually by hand. This is much more simple feeding way in comparison with the direct feeding to the packaging machine. Here the only requirement is that one
worker should allocate the products into the channels. After this, the transfer of the products to the packaging machine is realized through pusher with the application of servo
system.
· The electronical
system of the feeding line is integrated with the system of the packaging machine.