Dear Sir, We require the Rotary Drum Vacuum Filtration Unit. Please send us your offer at the earliest. Specifications of Rotary Drum Vacuum Filtration Unit Rotary Drum Vacuum Filtration Unit must be equipped with following accessories 1. Rotary Drum 2. Trough and Frame 3. Rotary Valve 4. Belt Discharge Assembly 5. Wash Roller/Trough (Belt Discharge) 6. Conventional Variable Speed Drum Drive 7. Inverter Drum Drive System 8. Agitator Drive 9. Cloth wash pipe 10. Scrapper knife 11. Pressure Gauges. Technical Details/Specification are as under :- Filter Design Type : Skid mounted unit Filtration Area ; 1.35 m2 Drum Diameter (mm) : 1220 mm Drum Face Width : 355 mm Tank Size : 1470 x 815 x 655 mm Drum Submergence : 40% Drum Drive : 1400 RPM motor, 6 RPM gear Drum Speed Variation : 9:01 Drum Speed Range : 0.1 to 1.0 rpm Agitator Size : 1220 x 475 mm Agitator speed : Typical 14 oscillations per minute Drum drive Motor kW/enclosure : 0.55 kw IP55 Agitator Motor kW/enclosure : 0.75 KW IP55 Vacuum Pump Capacity m3/hr (S.S. Vacuum Pump): 130 Suction / Discharge : 29 inches of Hg Filtrate Receiver : 310 x 1000 mm Material of Construction Drum, Tank, Filtrate receiver, Agitator : S.S. 316 Filter Belt : Polyamide Cloth or Cotton (300 mesh size) Control Panel Stop/Start push buttons :For filter drum drive, Agitator drive Vacuum Pump Indication lights : For filter drum drive, Agitator drive Vacuum Pump Assembling Arrangement : Mounted locally on unit Waiting for your early reply. Best Regards MZI GONDAL IQBAL SAEED & CO 1 BULL ROAD ADDA CROWN BUS LAHORE - PAKISTAN PH; 0092-423-7668772 CELL: 0092-300-8888764 Show More