Dear Sirs,Please be informed that we are interesting in cooperation with your company.We need cooling tower with centrifugal fan (PUSHER).Also please provide calculated irrigation water loss, l/h (m3/h).We have high water hardness - 8,5 mmol/L=23,8DH=425,3PPM.Can you provide water purification unit for cooling tower, for adding purified water to basin, purified water flow shouild be calculated as irrigation water loss.We are choosing the cooling tower for compressor with following technical parameters:- The cooled liquid is water.- Flow - 5.3 l / s- Inlet fluid temperature - 370- The temperature of the liquid at the outlet - 270C- Required power - not less than 220 kW (189000 kcal / h)- 2 operating modes (with irrigation / without irrigation and fan blowing)- 2 fan motor speeds- air flow - not lower than 13 m3 / s- irrigation water flow - not lower than 15 l / s- temperature sensor of the cooled liquid with visualization of indications and control of the fan speed- water flow switch- manual and automatic operation- automatic water recharge- automatic discharge of water for work in the winter- transfer of accidents to the SIAD TEMPO 1250 compressorKindly ask you to send the offer.Best regards,Simonenko SergeyProject ManagerCondition:NewOperating Voltage:380/400 VAC Show More