Dear sir, WE NEED 100,000MT STEEL BILLETS CFR JEDDAH SAUDIA ARABIA FOR DIRECT CONSUMER.IMMEDIATE SHIPMENTS 30,000AND THE REST IN INSTALLMENTS.THIS COMPOSITIOON IS REQUIRE ONLY SLIGHTLY CHANGES IN CARBON AND MAGNESE IS REQUIRED.WE NEED RESPONSE IMMEDIATELY REGARDS MOHAMMAD AHMAD KHAWAJACO 92-51-2828123.....92-51-2105348.....03005099123 TECHNICAL SPECIFICATION CHEMICAL COMPOSITION: St 3 SP/PS St 5 SP/PS C 0,14 - 0,22% 0,28 ?0,37 Mn 0,40 -0,65 % 0,50 ?0,80 Si 0,05-0,15% 0,15 ?0,30 P no more than 0,04% no more than 0,04% Cr no more than 0,30% no more than 0,30% Ni no more than 0,30% no more than 0,30% Cu no more than 0,30% no more than 0,30% MECHANICAL PROPERTIES: TENSILE STRENGTH: 37 -48 Kg/mm2 YIELD STRENGTH: 26 Kg/mm2 ELONGATION: 23% OTHER SPECIFICATIONS: SQUARE TOLERANCE: +4,0 -4,0 LENGTH TOLERANCE: +100 mm ROMBOIDITY/DIFFERENCE DIAGONALS: no more than 0,7 % CAMBER: no more than 1,5% (%) TWIST: no more than 3 degrees per 1 m length --------------- --------- -------------------- Dear Mr. Ahmed, Further to the telecom conversation we had on the mail offer for billets for and as explained to you regarding the change in specifications required. Kindly find here in the specifications for the Billets. The carbon levels have to be between 0.35 to 0.40% and the manganese levels at 0.90 to 1.20 %, as only then the required physical properties are achievable. Kindly confirm availability of same with the best prices, to take a decision. Regards Show More