Urea-Formaldehyde One Shot Resins Buyer and Importer

Dear Sir/Madam, I require a Thermosetting Powder Resin, obtained by condensation between Urea and Formaldehyde, modified by addition of fillers, additives and hardeners. Modified powder resins, commonly known as One Shot Resins, are formulated in such a way as to be immediately usable as adhesives after mere dispersion in water. Preferred Characteristics: Viscosity at 20 Degrees Centigrade At 50% - 180 At 55% - 450 At 60% - 1200 At 65% - 3000 Gel Time At 20 Degrees Centigrade – 5 H At 30 Degrees Centigrade – 100’ At 70 Degrees Centigrade – 4’ At 100 Degrees Centigrade – 45” Supplier or Manufacturer to provide complete Technical Data Sheet with suggested Pot-Life, Dissolution etc. Application: Wood Industry Operations such as Door Production, Hollow Panels, Fillets, High Frequency Presses etc. Physical and Chemical Properties (See Attached File) Supplier or Manufacturer may provide better suggestions. Regards, Jonah Joyitives and hardeners. Modified powder resins, commonly known as One Shot Resins, are formulated in such a way as to be immediately usable as adhesives after mere dispersion in water. Preferred Characteristics: Viscosity at 20 Degrees Centigrade At 50% - 180 At 55% - 450 At 60% - 1200 At 65% - 3000 Gel Time At 20 Degrees Centigrade – 5 H At 30 Degrees Centigrade – 100’ At 70 Degrees Centigrade – 4’ At 100 Degrees Centigrade – 45” Supplier or Manufacturer to provide complete Technical Data Sheet with suggested Pot-Life, Dissolution etc. Application: Wood Industry Operations such as Door Production, Hollow Panels, Fillets, High Frequency Presses etc. Physical and Chemical Properties (See Attached File) Supplier or Manufacturer may provide better suggestions. Regards, Jonah Joy Show More