Looking for 40W UL wall mount power adapter with multiple plugs (Four). Detailed DescriptionNeed UL Class 2 (Category EPBU and EPBU7) and CE certificated for home appliance usage.110V to 230VAC to 12VDC 3.5A outputRated Input Voltage 100Vac to 240Vac input AC voltageThe charger shall operate from 90Vac to 264Vac and the range switching is unnecessaryRated Frequency 50Hz or 60Hz and single phasePeak Inrush Current --With cold starting, the peak inrush current should less than 30AThe rated output voltage is specified at 12VThe output current will be performed from 3.5Aat CC modecapable to support 42Watts max continuously at all specified conditionsOver Current Protection --- Output current will be limited and less than 7A maxOutput cable and DC Plug---Output VoltageNo load voltage: 11.40V ~ 12.60V---Full load voltage: 11.40V ~ 12.60V---Rated Output CurrentThe output current will be performed from 3.5Aat CC mode.---Rated PowerThis switching adapter is capable to support 42Watts max continuously at all specified conditions.Wire:2464, 20# 80℃ 300V Length 1.8M .Plug: 5.5*2.5*10mmDrop the charger from a height of 76cm onto a hardwood floor, hitting the charger for 6 times, no mechanical damages or other failures, no electrical deterioration and other failures comparing to before test condition.Operating Temperature 0u00b0C TO 40u00b0C Storage Temperature -20u00b0C TO +70u00b0CCase/Resin materials Flame resistance applies to UL94V-0 or moreEAU is 50K.You can send quote to joe.lin at itt.com Show More