Good day! We need a touch switch for the furniture. Below are its specifications and photo. Also interested in the price for one piece of product: HZK201-Touch automatic switch to touch the wire, art.08.142.01.500 (G09336). The switch is designed to work with lighting devices, such as incandescent lamps, led light sources (lamps, led strips), halogen high-voltage lamps, halogen low-voltage lamps with a transformer, fluorescent lamps, etc.Lighting equipment will be turned on or off at a short touch touch touch (wire), which is connected to the switch HZK201. Decorative screws, handles, rivets made of metal and other small metal objects can be used as a sensor. It is impossible to connect a touch output of the sensor on the metal structure a large amount of: - metal frame Cabinet, - cooker hoods, - design of aluminum profile, etc. If you need to install a sensor element for a metal construction larger volume - frame , body, etc., touch the contact must be electrically isolated by plastic bushings , washers, etc. In the factory preset average sensitivity of the sensor. The sensitivity can be adjusted using a screw mounted on the housing. Technical parameters: 1. Switching voltage: 220-240 V, 50Hz 2. Load capacity: 500 W max 3. The maximum length of a touch-wire: 4 m 4. The length of the wire with the metal contact on: 17 cm (solid) 5. Dimensions (length x width x height): 106 x 32 x 21 mm 6. Weight: 50 gr. 7. Class of protection against electric shock: II 8. Degree of protection against exposure to environmental IP20 9. Body color: white 10. Body material: plastic Attachment To view attachment please Sign In Now! Not a member yet? It takes less than a minute to Join FREE now! Show More