Requirement battery cell for electric motorcycle Buyer and Importer

interested in this batteryBattery Specification for Tomsar Engineering LtdI require a sample of a battery to meet the following specification:•16S battery pack 59.2 Volts 16S4P or 16S5P •20Amp/hrs.•Continuous current draw up to 50Amps, maximum draw would be for 4Mins then drop to approximately 35 amps maximum time 7minutes•Normal current draw would be 30Amps dropping 20Amps for 2minutes.•Preference would be 21700 batteries.•The preference for the size would be square rather than a long rectangular shape.•Charge current up to 10Amps.ShapePreferred shapeSquare rather than rectangular The application is a battery powered welder or industrial equipmentIf the project develops then UN38.3 testing, and documentation will be required.Contact: Tony.Parnabytomsar.co.uk Weight: about 6 kg Type: Lithium Battery Voltage: 60 V Size: 140*233*138 mmattery pack 59.2 Volts 16S4P or 16S5P •20Amp/hrs.•Continuous current draw up to 50Amps, maximum draw would be for 4Mins then drop to approximately 35 amps maximum time 7minutes•Normal current draw would be 30Amps dropping 20Amps for 2minutes.•Preference would be 21700 batteries.•The preference for the size would be square rather than a long rectangular shape.•Charge current up to 10Amps.ShapePreferred shapeSquare rather than rectangular The application is a battery powered welder or industrial equipmentIf the project develops then UN38.3 testing, and documentation will be required.Contact: Tony.Parnabytomsar.co.uk Weight: about 6 kg Type: Lithium Battery Voltage: 60 V Size: 140*233*138 mm Show More