For our project procurement we need the following components.Specification of full bore electromagnetic flow meter are below.1) Power source : 24v( must be in built battery operated ).2) Protection glass : IP-68.3) Accuracy : 2%4) Limit flow velocities of water from 0.1m/s to 10m/s.5) Minimum conductivity of water = 20 s/cm6) Working water pressure = 6 to 10bar.7) Communication serial data( RS232)8) Security of data and password= must be end to end encrypted.Full bore electromagnetic flow meter should be designed , manufactured and calibrated according to ISO 4064 standard. The flow meter shall be capable of measure directional flow, providing separate tantalizers for both direction. Electromagnetic flow meter shall be internal battery and a velocity sensing electromagnetic type , microprocessor based signal converter, sealed housing and flanged tube meter for 10 to 16 bar as specified.The meter shall be equipped with minimum eight digit digital totalizers, selectable engineering unit and shall be accurate within 0.5% of true flow . The accuracy should be inclusive of linearity , hysteresis , repeatability , temperature and pressure effectsSN DESCRIPTION SIZE Quantity1 Full bore Electromagnetic water flow meter 36 12 Full bore Electromagnetic water flow meter 32 43 Full bore Electromagnetic water flow meter 30 34 Full bore Electromagnetic water flow meter 24 175 Full bore Electromagnetic water flow meter 18 446 Full bore Electromagnetic water flow meter 16 117 Full bore Electromagnetic water flow meter 14 108 Full bore Electromagnetic water flow meter 12 1159 Full bore Electromagnetic water flow meter 10 5310 Full bore Electromagnetic water flow meter 8 5911 Full bore Electromagnetic water flow meter 6 7512 Full bore Electromagnetic water flow meter 4 2613 Full bore Electromagnetic water flow meter 3 214 Full bore Electromagnetic water flow meter 1.50 1 Show More