MVR steam compression evaporator Buyer and Importer

Hi,Im interested in your product MVR steam compression evaporator, I would like some more details.below is my design requirements:1) Influent: Polyethylene Glycol(PEG) + Water ratio 50%:50%, Density : about 1.06 kg/L2) Effluent: PEG + Water ratio 99.5%:0.5% Density: 1.12 kg/L3) Capacity Influent : 63m3/day4) Capacity Effluent: 31 m3/day5) Heating Source: Conducting oil6) Option to use: MVR to save energy7) Boiling Temp PEG: about 150degC at atmosphere I need to manufacture 63,000 Kg/day of evaporator but the skid will be very large.Thus, we would like to split the capacity to 20,000 Kg/day x 3 units so I can propose to my customer.Important information for us now is the dimension of the design and budgetary cost so we can check with our customers.Hope this information is enough for your design. Any other question, please feel to clarifyThanks and regards,Chong HauPhD, Technical ConsultantEcolance Technology Pte Ltd - a subsidary of Piping and Engineering Pte LtdMobile: +65 9728 4202Regards,Pang Chong HauThis Message is from mobileylene Glycol(PEG) + Water ratio 50%:50%, Density : about 1.06 kg/L2) Effluent: PEG + Water ratio 99.5%:0.5% Density: 1.12 kg/L3) Capacity Influent : 63m3/day4) Capacity Effluent: 31 m3/day5) Heating Source: Conducting oil6) Option to use: MVR to save energy7) Boiling Temp PEG: about 150degC at atmosphere I need to manufacture 63,000 Kg/day of evaporator but the skid will be very large.Thus, we would like to split the capacity to 20,000 Kg/day x 3 units so I can propose to my customer.Important information for us now is the dimension of the design and budgetary cost so we can check with our customers.Hope this information is enough for your design. Any other question, please feel to clarifyThanks and regards,Chong HauPhD, Technical ConsultantEcolance Technology Pte Ltd - a subsidary of Piping and Engineering Pte LtdMobile: +65 9728 4202Regards,Pang Chong HauThis Message is from mobile Show More