Specifications:- USB Type A connector on one end.- GX12-5 Female Connector on the other end.- Cable is 10' long- Cable is sleeved with black sleeving material- On each end of the cable, the sleeving material is held in place with black adhesive lined shrink flex.The side with the GX12-5 connector, the shrink flex is short and contained inside the connector head. On the USB end of the cable, the sleeving material is held in place with 1 of black adhesive lined shrink flex, placed just after the USB strain relief.I have attached pictures of all pin outs and current assemblies. In one, you can see an early prototype from another company that used a thin USB cable so it didn't fit snugly in the GX12-5 housing. I can not have this happen; they must be the same as my example.The USB cables I use follow the following specs:- 100% compliant with USB 2.0 specifications- 28 AWG data conductors and 24 AWG power conductors- Gold plated connectors ensure a smooth, corrosion-free connection- Molded connector heads with molded strain relief boots- Shielded to protect against external signal interference Show More