Looking for Cnc part Buyer and Importer

I want a 1200 X 2400mm (I think, this is the larges size, that still acommodates ball screw), or something in this area, sized CNC, linear guideway (do you make CNC with DOUBLE RAIL SYSTEM per Y axesX linear guideway 30mm with HGH30CA, Y linear guideway 30mm with HGH20CAZ linear guideway 25mm with HGH25CAXYZ ball screw 2550 (diameter 25mm), I want to have C5 precision class (NOT C7), can you make it ???Thick profile table 20-40mm, the rest of the profile also thick (pls tell me how thick???), Motor spindle 3 - 5 kw, with a good VFD (Delta maybe), and WATER COOLED, it can be 380V or 230V ( do you have option for 230V???)WATER Cooling System for cutting bit, with WATER TANK, pump, hoses, etc .....,VACUUM System, for the entire table, (If I can acommodate both the vacuum and the water cooling system, would be perfect, if not, only the water cooling system for the cutter)System for manual or automatic oiling,Limit switches and Z tool sensor,The machine to be completly dust proof covered,Only the nose, with the mounting system for the sprayer from the air compressor (I have the air compresor machine),I want SERVOMOTOR (no stepper motor) strong servo at least 7-8A, Leadshine servo and Leadshine or Yako drivers,Good DSP controller, USB or ethernet, with Mach 3 controls (to start, close, and choose RPM of motor from design file)I work Titanium 5-10mm, Carbon Steel 20-40mm, Aluminium 30-50mm, mdf, wood, plastic.also I want all the details of the machine, like exactly what controller, what parts are in it.o you make CNC with DOUBLE RAIL SYSTEM per Y axesX linear guideway 30mm with HGH30CA, Y linear guideway 30mm with HGH20CAZ linear guideway 25mm with HGH25CAXYZ ball screw 2550 (diameter 25mm), I want to have C5 precision class (NOT C7), can you make it ???Thick profile table 20-40mm, the rest of the profile also thick (pls tell me how thick???), Motor spindle 3 - 5 kw, with a good VFD (Delta maybe), and WATER COOLED, it can be 380V or 230V ( do you have option for 230V???)WATER Cooling System for cutting bit, with WATER TANK, pump, hoses, etc .....,VACUUM System, for the entire table, (If I can acommodate both the vacuum and the water cooling system, would be perfect, if not, only the water cooling system for the cutter)System for manual or automatic oiling,Limit switches and Z tool sensor,The machine to be completly dust proof covered,Only the nose, with the mounting system for the sprayer from the air compressor (I have the air compresor machine),I want SERVOMOTOR (no stepper motor) strong servo at least 7-8A, Leadshine servo and Leadshine or Yako drivers,Good DSP controller, USB or ethernet, with Mach 3 controls (to start, close, and choose RPM of motor from design file)I work Titanium 5-10mm, Carbon Steel 20-40mm, Aluminium 30-50mm, mdf, wood, plastic.also I want all the details of the machine, like exactly what controller, what parts are in it. Show More