Looking for anti-corrosion Chemicals Buyer and Importer

Dear Sir or Madam: I am Dr. Mahmoud Assaad; we need /11/ tons from anticorrosion According to the below technical Specifications: OBJECTIVE: Supplying of anticorrosion, which used to protect the internal surface of gas pipes from internal corrosion by forming a film on internal surface. Specifications Of Produced Gas Gas composition: C1, C2, C3, n-C4, i-C4, n-C5, i-C5, C6, C7, N2, CO2, H2S. Ratio of H2S: 0. 75% Wt & Ratio of CO2: 10% Wt. Operation pressure: (14-22)bar. The produced gas is saturated with water vapour. Physical and chemical properties of required anticorrosion Quantity (ton) pour point (ºC) PH Viscosity (CS) @ 25 ºC 11 -10 min 6 min 20 min Ratio of protection: (90% min) at injection rate (35 PPM max). Solubility: easy Soluble in water and Hydrocarbon without any residue, suspend, emulsion or secondary results with underground water association with produced gas. Storage: ability to storage more than (24) month in atmospheric conditions at (-10+50 ºC). Required anticorrosion don't have any negative effect on the gas processing (gas sweetening, gas dehydration). Required anticorrosion don't have any negative effect on the pump equipment (pumps, tanks and fitting). Required anticorrosion is save for the operators when used according to professional Safety and Security. Required anticorrosion is ready to injection in pipes without mix with water. Two simples each one (1 Kg) and MSDS and COA shall be submitted. PACKAGING: Anticorrosion must be packed closely within metallic or plastic barrels. --------------------------------------------------------------------------------------------------=--- Please submit your best quotation for CIF sea lattakia port, ASAP. Mahmoud . ing of anticorrosion, which used to protect the internal surface of gas pipes from internal corrosion by forming a film on internal surface. Specifications Of Produced Gas Gas composition: C1, C2, C3, n-C4, i-C4, n-C5, i-C5, C6, C7, N2, CO2, H2S. Ratio of H2S: 0. 75% Wt & Ratio of CO2: 10% Wt. Operation pressure: (14-22)bar. The produced gas is saturated with water vapour. Physical and chemical properties of required anticorrosion Quantity (ton) pour point (ºC) PH Viscosity (CS) @ 25 ºC 11 -10 min 6 min 20 min Ratio of protection: (90% min) at injection rate (35 PPM max). Solubility: easy Soluble in water and Hydrocarbon without any residue, suspend, emulsion or secondary results with underground water association with produced gas. Storage: ability to storage more than (24) month in atmospheric conditions at (-10+50 ºC). Required anticorrosion don't have any negative effect on the gas processing (gas sweetening, gas dehydration). Required anticorrosion don't have any negative effect on the pump equipment (pumps, tanks and fitting). Required anticorrosion is save for the operators when used according to professional Safety and Security. Required anticorrosion is ready to injection in pipes without mix with water. Two simples each one (1 Kg) and MSDS and COA shall be submitted. PACKAGING: Anticorrosion must be packed closely within metallic or plastic barrels. --------------------------------------------------------------------------------------------------=--- Please submit your best quotation for CIF sea lattakia port, ASAP. Mahmoud . Show More