Dear Sir, Madam,For the OxIndus Project, I am looking for a serious, reliable and capable manufacturer of Hydraulic Briquetting Machine.I want robust enought machines as they can run at least 10 year straight through.The robustness of the machine shall be as the robustness of your 30 T/h or 20 T/h models,but in fact, the machines will run at lower capacity: 3 T/h or 5 T/h. The material to be briquetted is basically a mix of- Fine dust (10 consisting in metalic oxide and other mineral oxide (Fe2O3, ZnO, SiO2, CaO, Al2O3, MgO, NaCl, MnO, KCl,...)- Coke fines (1 mm to 3 mm)- Water (4 - 6%) will be added for the briquettingThis imput material is abrasive and corrosive (up to 10% of Chlorine)OxIndus Project will need 60 Hydraulic Briquetting Machine in the 5 coming years. These Machine are intended to operate anywhere across the world (Asia, Europe, South America, North Africa, ...)We will not source these Briquetting Machine by a supplier that cannot provide us first with the relevant and complete characteristics of its equipement.The main requirements for the machine are:- Pre-compaction system: Screw-Feeder- Hydraulic pressure control - Pressure: 200 bar- Disc Shape Briquettes Kindly provide me with:1. Complete information and characteristics (as much as possible) on your Hydraulic Briquetting Machine models (kindly note the following: the machines are intended to operate at 3T/h or 5T/h, but shall have the robustness of the 20-30 T/h models)2. Price (FOB China)3. Lead time for the manufacture.4. Some picture Then, after receiving your reply, I will send you a more complete document describing our requirements in deeper details.This document will also need to be filled out by you with the characteristics of your Briquetting Machine (Steel grades, overall dimensions, Roller dimensions, power of hydraulic system, Supplier of moto-reducer system, .....)Waiting for your more complete replyThanks in advance Show More