Buy Monel 400 Pipe/Tube Buyer and Importer

Monel 400 Pipe/Tube Name: Mary Zhu Email: mary (at) htpipe(dot)com MSN: htpipemary (at)hotmail(dot)com Skype:htpipemary Alloy 400, UNS N04400, NS111, DIN 2.4360 Plate & sheet, bar, pipe & tube, flanges, fittings( elbow, reducer, tee, cross, bend and pipe cap) and wire. ASTM Specifications Pipe Smls Pipe Welded Tube Smls Tube Welded Sheet /Plate Bar Forging Fitting Wire B165 B725 B163 B127 B164 B564 B366 Chemical Composition, % C Mn S Si Ni Cu Fe .30 max 2.00 max .024 max .50 max 63.0 min 28.0-34.0 2.50 max Mechanical Properties Typical room temperature Tensile Properties of Annealed Material Product Form Condition Tensile (ksi) .2% Yield (ksi) Elongation (%) Hardness (HRB) Rod & Bar Annealed 75-90 25-50 60-35 60-80 Rod & Bar Cold-Drawn Stress Relieved 84-120 55-100 40-22 85-20 HRC Plate Annealed 70-85 28-50 50-35 60-76 Sheet Annealed 70-85 30-45 45-35 65-80 Tube & Pipe Seamless Annealed 70-85 25-45 50-35 75 max * 4. Characteristics: Resistant to seawater and steam at high temperatures Excellent resistance to rapidly flowing brackish water or seawater Excellent resistance to stress corrosion cracking in most freshwaters Particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated Offers some resistance to hydrochloric and sulfuric acids at modest temperatures and concentrations, but is seldom the material of choice for these acids Excellent resistance to neutral and alkaline salt Resistance to chloride induced stress corrosion cracking Good mechanical properties from sub-zero temperatures up to 1020F High resistance to alkalis NS111, DIN 2.4360 Plate & sheet, bar, pipe & tube, flanges, fittings( elbow, reducer, tee, cross, bend and pipe cap) and wire. ASTM Specifications Pipe Smls Pipe Welded Tube Smls Tube Welded Sheet /Plate Bar Forging Fitting Wire B165 B725 B163 B127 B164 B564 B366 Chemical Composition, % C Mn S Si Ni Cu Fe .30 max 2.00 max .024 max .50 max 63.0 min 28.0-34.0 2.50 max Mechanical Properties Typical room temperature Tensile Properties of Annealed Material Product Form Condition Tensile (ksi) .2% Yield (ksi) Elongation (%) Hardness (HRB) Rod & Bar Annealed 75-90 25-50 60-35 60-80 Rod & Bar Cold-Drawn Stress Relieved 84-120 55-100 40-22 85-20 HRC Plate Annealed 70-85 28-50 50-35 60-76 Sheet Annealed 70-85 30-45 45-35 65-80 Tube & Pipe Seamless Annealed 70-85 25-45 50-35 75 max * 4. Characteristics: Resistant to seawater and steam at high temperatures Excellent resistance to rapidly flowing brackish water or seawater Excellent resistance to stress corrosion cracking in most freshwaters Particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated Offers some resistance to hydrochloric and sulfuric acids at modest temperatures and concentrations, but is seldom the material of choice for these acids Excellent resistance to neutral and alkaline salt Resistance to chloride induced stress corrosion cracking Good mechanical properties from sub-zero temperatures up to 1020F High resistance to alkalis Show More