Aluminum Sign Blanks For Roads Buyer and Importer

Shapes:rectangle and etcSize:4 SizesAluminium Panel Thickness 2.2mm - 4.0mmMaterial:Aluminum (6061-T6 or 5052-H38)Aluminum Sign Blanks are to be de-burred, etched using an acid etch solution, and de-greased using an alkaline degreasing solution, so as to be ready for the application of reflective sheeting. There must be no sharp edges on any blanks.- Aluminum Blanks in items #1 to 3 are to be 0.081 gauge thick, have two 7/16 holes punched on theirVERTICAL centerline and radius corners of 4cm- Aluminum Blanks in item # 4 & 5 are to be 0.125 gauge thick, have two 7/16 holes punched on theirVERTICAL centerline and have square corners.rred, etched using an acid etch solution, and de-greased using an alkaline degreasing solution, so as to be ready for the application of reflective sheeting. There must be no sharp edges on any blanks.- Aluminum Blanks in items #1 to 3 are to be 0.081 gauge thick, have two 7/16 holes punched on theirVERTICAL centerline and radius corners of 4cm- Aluminum Blanks in item # 4 & 5 are to be 0.125 gauge thick, have two 7/16 holes punched on theirVERTICAL centerline and have square corners. Show More