Application
This type of butterfly valve series is a kind of sanitary valve used to control the material transfer. It is widely used in the food, beverage, rmaceutical, and chemical industry area.
Â
Design features
Free maintenance
Portable and compact
Small torque
The handle can be installed on the side of the valve body, no matter the flow direction.
The valve can be replaced in any connection, and the length will not change.
It can match with pneumatic and electric actuators
It can match with the CIP wash port
The butterfly valve's bi-directional flow is possible at maximum operating pressure. Since the valve port corresponds to the piping diameter, a high flow capacity is guaranteed.
Â
It features ease of maintenance, repeatable on-off, long-life durability.The concentric design is commonly used in the power generation, brewing, water, and food industries and is suitable for both gaseous and liquid service. Typically applied in food and beverage, pulp and paper, chemical/petrochemical process, etc.
Key features:
Compact Design
Investment Casting
Bubble Tight Shutoff
High CV Value
Quick connection
Wide Sealing Face
Â
Name | Sanitary Butterfly Valve |
Material | Stainless Steel 304 or 316L/1.4301,1.4404 |
Seal | Silicon/ Viton/ EPDM/PTFE/NBR |
Max Pressure | 10 bar (DN25-DN100),8 bar (DN125-DN250) |
Size | 1/2"-10" or DN15-DN250Â or OD12.7-273 Clamp 25.4-286 |
Thickness | 1.5-10mm |
Surface | Ra0.8~1.6μm |
Temperature | Silicon:(-50~+180 â),EPDM:(-20~+135â),FPM:(-30~+230â) |
Standard | 3A, SMS, DIN, RJT, IDF,ISO |
Connection Way | Weld, Tri-Clamp, Male, Female, Flange, or Combinations |
Operated | Manual, Pneumatic, Electric, can be exchangeable with each other |
Application | Food & Beverage & Chemicals & rma |