Join today and be a part of the fastest growing B2B Network Join Now

220V air compressor air pump for 7m pneumatic mast

  • Origin: China
  • Supply Type: oem service
  • Processing Time: 10 days production time
  • Min Order: 1

Quick Details

Extended height 7m
Retracted height 2.0m
Max payload 10kg
Windload 100km/h
Color Bzonze
Surface treatment technology Hard anodizling
Sections 5
Diameter of max tube 87mm
Temperature -40-+50℃
Accessories Air tube,foot pump,top plate,bottom base
Used on Ground or vehicle mounted

Supplier Info.

  • Employees Total 11-50
  • Annual Revenue US$5 Million - US$10 Million
Product Description

What is a Pneumatic Mast?

      Pneumatic masts are a type of elevation solution using compressed air to raise the central column to its extended height. The masts can either be locking, which each section locks into place once it reaches its maximum extension - designed for safety and long term use( do not lift down the mast), or non-locking where each section sits on cushionÂ

of air- more appropriate for short time using.

Common application

Telecommunications, Surveillance, Broadcasting, Disaster Recovery, Site Surveys, Energy Production, Site so on.

Mast specification

Available Extended height:2m to 30mHead load capacity:5kg to 300kg.

Lift operation chooseIf no electricity and head load is not heavy, lift control could be foot pump or hand pump---manual lift.

If thers is electricity and head load is heavy, lift control should be air compressor, easily and quickly.

Specification
                            tripod pneumatic mast for camera
Model No.
TAL-P7-2.0-10
Material
aluminum alloy
surface treatmentÂ
Hard anodizingÂ
Color
Bronze
Extended height
7.0m
Retracted height
2.0m
Max head load
10kg
SectionsÂ
5sectionsÂ
Mast net weight
22kg( without  accessories)
Max wind load
100km/h ( with guy iv>
top flange
100mm/8.5mm (diameter/thickness)
bottom base
150mm/18mm(diameter/thickness)
Detail

Operation steps

1.check the mast in good condition2.fixed the mast on the ground. tripod fixed diameter is 3.4m,guy meter is 8m.3.air inlet of control valve connect with air compressor.4.air outlet of control valve connect wtih the mast.5. once all mounted, you must keep the lifting control valve handle bar in middle location. (it make the air do not come into mast)6.open the air compressor switch, at same time adjust the pessure regulating switch to reach 0.2MPa which the pressure gauge shows.7.then pull up the lifting valve handle bar, mast will rise.8.if you want to make the mast stop in some height, just make the handle bar in middle.

9. when lift down the mast, please pull down the lifting control valve handle bar..

Packing & Delivery
Package information based on different specifitation
extended height less than 9mÂ
also weight less than 70kg
packed into a  carton, inner space filled with foam to protect mast.
 wooden case if customer request.
extended height more than 9m also weight more than 70kg
packed into plywood case, inner space filled with foam to protect mast.
Operation precaution

No overloading. Ensure the area in which the mast is deployed is free of obstructions and overhead power >Any abnormal nomena( such as inflexible or stuck) occurs when lifting, you should stop it immediately, identify the reasons, and lift it after cleaning troubles.Note: if special request, please confirm with our technician.Â

Other Specification
Pneumatic telescopic mast
MODEL No.
Extended Height(m)
Retracted Height(m)
Bottom OD(mm)
TOPOD(mm)
SectionNO.
Head-load(KG)
TAL-2.0-1.3-150-AT8
2
1.3
118
98
2
150
TAL-3.0-1.5-50-AT8
3
1.5
98
66
3
50
TAL-4.0-1.3-20-AT8
4
1.3
87
43
4
20
TAL-4.5-1.65-50-AT9
4.5
1.65
118
66
4
50
TAL-5.0-1.7-40-AT8
5
1.7
98
51
4
40
TAL-5.0-1.75-30-AT9
5
1.75
98
51
4
30
TAL-6.0-1.7-30-AT8
6
1.7
118
51
5
30
TAL-6.0-1.75-12-AT8
6
1.75
87
28
5
12
TAL-6.0-2.0-50-AT9
6
2
118
66
4
50
TAL-6.0-1.95-30-AT8
6
1.95
87
43
4
30
TAL-6.0-1.5-25-AT9
6
1.5
118
51
5
25
TAL-7.0-1.95-40-AT8
7
1.95
118
51
5
40
TAL-8.0-1.8-50-AT9
8
1.8
160
51
7
50
TAL-8.0-2.2-60-AT7
8
2.2
140
66
5
60
TAL-8.0-2.0-25-AT8
8
2
118
36
6
25
TAL-9.0-2.15-30-AT8
9
2.15
140
51
6
30
TAL-10.0-2.4-30-AT7
10
2.4
140
51
6
30
TAL-12.0-2.7-250-AT8
12
2.7
279
140
7
250
TAL-15.0-3.5-150-AT9
15
3.5
229
98
6
150
TAL-16.0-3.0-30-AT8
16
3
180
51
8
30
TAL-18.0-3.0-100-AT8
18
3
279
66
10
100
TAL-20.0-3.3-55-AT8
20
3.3
229
66
9
55
TAL-30.0-4.0-30-AT8
30
4
316
51
13
30

NOTE:

above specification does not include all we can do.

Our Company
Talents is a Chinese company that design, manufacture and supply a range of manual/electric/pneumatic/hydraulic operated telescopic masts and lifting devices that made of aluminum alloy tube, stainless steel tube, fiberglass tube and carbon fiber tube.Talents was founded in 1995, since then we focus on offering customers high quality, durable, applied and economic masts. We are serving our long-term customers from the five Continents and the four Oceans.

Our masts are CE certified, we have been a golden supplier on Alibaba since 2007, we are keeping with our customers an one for one timely information feedback, we have organized an expert team for quality control and inspection system and have Multi-way fast delivery channels, we are supplying one year free after-sale warranty to the buyer. We think outside the box and are continually developing new products to meet customer requirements, what you are asking for is our motive power of task, we wish one of our products will well-meet what you demand.

Welcome to inquiry

Any questions or inquiry, welcome to us at any time!

Design and manufacture of telescopic and mast systems.
Our reputation is built on product quality.
Premium Services
Tell us what you need
Girl Right
Cross Popup
Arrow 2

I Am :

Signup today to claim your Discount. Get Started before it's too late!

Arrow 1
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it. Ok