stainless steel  sticking machine TMD      Â
Characteristic and usage
Â
This production ts wet curing reactive polyurethane hot melt(PUR),stick adornment material such as PVC, PE,PET,PETG on the whole roll steel , galvanized sheet , aluminum plate and so on , it can bended. punched after laminating curing .
Â
Technical specification
Â
Mode specification | Â 240x1350mm |
 Board length |  600 - unlimited |
 Board width |  1220mm |
 Board thickness |  Coil -0.3-1.5mm , Sheet -1.8-35mm |
 Feeding speed |  1-25m/min |
 Motivity power |  24kw |
 Heating power |  63kw |
 Paper width |  1280mm |
 Overall dimensions | Âmm |
 Machine weight |  15000kg |
Â
Automatic loader and unloader device
Â
Technical specification:
Board length   |   280~2400mm |
  Board width     |   200~1220mm |
  Board thickness  |   10~60mm |
  Max.weight of Board  |   100kg |
  Max.working cycle |   8times/min |
  Voltage   |   380V |
  Frequency  |   50/60HZ |
  Heap board prcision |   less than 5mm  |
  Total height |   Within 1300mm |
  Feeding speed |   0~30m/min(Frequency control) |
Â
X axis and Y axis drive : Domestic worm gear reducer motor
Feeding conveyor
Translational slide rail :Â ide rail ,move back and forth ,
Synchronous belt : Domestic high torque synchronous belt
Pneumatic components and air tube : Taiwan AIRTAC
Touch screen : Schneider
Pull over device : Roller are covered by rubber , the roller spacing can adjust and tilt .
Suction : every automatic loader with 4 vacuum generator , every vacuum generator control 4-8 suckers, the max suction of sucker is 20 kg .
Table dimension : 2200*1120mm,
The capacity : 3T,
lifting stroke: 45mm;
Tel:8
Mobile:8
Web:Â