Nominal pressure | 1.0mpa 1.6mpa 2.5mpa |
Shell test pressure | P=1.5mpa |
Sealing test pressure | P=1.1mpa |
Applicable medium | Water |
Applicable temperature | 0-80 ℃ |
principleï¼
After the pump stops,the medium flows reversely,the pressure of the valve upper cavity is bigger than that of the lower cavity to have the disc fall off and closed ,while the speed controlling the back-water to enter the diaphragm can adjust the spped for the valve to be closed so as to get to the slow closing effect.
purpose:
used for the pump outlet of high bulidings or other water supply systems to prevent the medium from back-flow and reduce water hammer so as to get a safe and peaceful effect.
technical parameters:
1.Nominal pressure :1.0mpa 1.6moa 2.5mpa
2.shell tese pressure: P=1.5mpa
3.sealing test pressure: P=1.1mpa
4.applicable medium: water
5.applicable temperature ï¼0-80 â
characteristicï¼
able to prevent water hammer and water attack from occurring,getting to the slow closing and silencing effect, as a check valve capable of adjusting and controlling the open-close speed,it can make a best open or close speed on the site,when pump is started or stopped.
5