Cores | Up to |
1. Brief introduction of optical fiber cables
GYTC8S: Metallic strength member, Loose tube stranded and filled with jelly, Corrugated steel tape, Outer PE sheath, 3.0mm galvanized stranded steel an>. Self supporting type optical cable for outdoor.
Application:
JINLONG Figure-8 cables are self-supporting cable designed for aerial installation. The cable design provides easy and economical one-step installation and stable performance over a wide temperature range and is compatible with any telecommunication grade optical fiber.
Designï¼
l Up to 288 fibers
l Low attenuation, low dispersion, stable control of excess length makes the optical cable perfect mechanical and environmental properties.
l As a self-supporting design, easy and one-step installation,using standard hardware and working methods
l Designed in accordance with applicable industry technical specifications, standards and references including IEC and EN
2. Cable Construction
2.1 Cable cross-section
Figure 1 cross-section of GYTC8S
3. Cable Specification
3.1 Sheath marking
GYTC8S 24C G652D JLGD 2014 XXXX M | |
JLGD | : Manufacturerâs brand(we can design as per client brand) |
2014 | : Manufacture year |
GYTC8S | : Cable type |
24C G652D | : XX cores single-mode optical fiber (ITU-T Rec. G.652D) |
XXXXm | : Mark of meters |
*The marking is printed every 1 meter; **âG.652Dâ means ITU-T Rec. Low Water Peak (LWP) G.652D Single Mode Optical Fiber. |
3.2 The color of marking is white, but if the remarking is necessary, the yellow color marking shall be printed newly on a different position.
3.3 An occasional unclear of length marking is permitted if both of the neighboring markings are clear;
3.4 The both cable ends are sealed with heat shrinkable end caps to prevent water ingress.
3.5 Fiber color code
No. | 1 | 2 | 3 | 4 | 5 | 6 |
Color | Blue | Orange | Green | Brown | Gray | White |
No. | 7 | 8 | 9 | 10 | 11 | 12 |
Color | Red | Black | Yellow | Viloet | Pink | Aqua |
Note: fiber color in each tube according to the above table, but the last fiber in each tube is of nature color.
3.6 Color codes for Loose Tube (LT) & Filler Rod (FR)
Fiber /span> | > | |||||
1 | 2 | 3 | 4 | 5 | ||
8 | LT | LT | FR | FR | FR | |
12 | LT | LT | FR | FR | FR | |
24 | LT | LT | LT | LT | FR | |
48 | LT | LT | LT | LT | FR |
3.7 Cable structure and parameter
Fiber count | Max. fiber per tube | Total unit /span> (LT + FR) | Sheath thickness (nominal*) Outer mm | Outer diameter (nominal*)OD*Height mm | Max. tensile strength ( N ) | Max. Crush resistance ( N/100mm ) |
8 | 4 | 5(2LT + 3FR) | 1.8 | 9.9*18.8 | 4000 | 1000 |
12 | 6 | 5(2LT + 3FR) | 1.8 | 9.9*18.8 | 4000 | 1000 |
24 | 6 | 5(4LT + 1FR) | 1.8 | 9.9*18.8 | 4000 | 1000 |
48 | 12 | 5(4LT + 1FR) | 1.8 | 11.2*21.2 | 4000 | 1000 |
* The nominal sheath thickness may vary by ±0.2mm.
** The nominal outer diameter and height may vary by ±2.0mm.