G1AH Series- Ex-Proof HVAC (ATEX & IECEx Zone1)
CharacteristicsG1AH series are wall mounting type HVAC (Heating Ventilation & Air-Conditioner) products that control the indoor temperature of the analyzer house, control room, or operators' restrooms installed in the explosion hazard area, and maintain indoor positive pressure by taking in outdoor air.The indoor unit and the outdoor unit are integrated, and the refrigerant is charged when manufactured.Products are easy to install, and can be operated immediately after installation without charging the refrigerant. Temperature is controlled by cooling with a refrigerant compressor and heating with an electric heater or steam.Air filters are installed at the external air inlet and the internal circulation inlet, which can be replaced easily.The blower fan and the condenser fan are directly connected to the motor shaft, and operated.It can be mounted directly on the wall or using the duct.
Optional• 304 or SS316 Case• Fresh air inlet hood or stack with bird screen and rain cap• Copper-finned copper tube coils• Steam heating coil• Industrial coatings on tube coils and finned for additional corrosion protection• General Purpose HVAC
