Titanium & Titanium Alloy Tube
| Specification | Welded Tube: Φ(10-1050) x (6-30) x L | |||||
| Seamless Tube: Φ(3-117) x (0.2-6) x L≤6000mm | ||||||
| Model | Gr1, Gr2, Gr3, Gr5, Gr7, Gr12 etc. | |||||
| TA1, TA2, TA3, TA9, TA10, TC4 | ||||||
| Standard | GB/T3524, GB/T26057, GB/T26058, ASTM B337, ASTM B338 | |||||
| Status | Annealing status (M), Hot Extrusion status (R) | |||||
| Remark | Can provide all kinds of Titanium tube according to clients requirement | |||||
| Product detail: Titanium Tube can be divided into welded tube & seamless tube. Seamless tube is suitable for variety field using Titanium and titanium seamless tube produced by extrusion. It is also used for industrial titanium & titanium seamless tube produced by cold pressing. | ||||||
|  Titanium and Titanium alloy Room Temperature mechanical properties  | ||||||
|  | Model | Status | Tensile Strength  Rm/Mpa | Specified non-proportional extension Strength Rp0.2/Mpa | Break Elongation A/%,≥ | |
|  Welded Tube (GB/T26057-2010) | TA1 | M (Annealing status) | ≥240 | 140-310 | ≥24 | |
| TA2 | ≥400 | 275-450 | ≥20 | |||
| TA3 | ≥500 | 380-550 | ≥18 | |||
| TA9 | ≥400 | 275-450 | ≥20 | |||
| TA10 | ≥483 | ≥345 | ≥18 | |||
| Seamless Tube (GB/T3624-2010) | TA1 | M (Annealing status) | ≥240 | 140-310 | ≥24 | |
| TA2 | ≥400 | 275-450 | ≥20 | |||
| TA3 | ≥500 | 380-550 | ≥18 | |||
| TA9 | ≥400 | 275-450 | ≥20 | |||
| TA10 | ≥460 | ≥300 | ≥18 | |||
| Seamless Tube (GB/T26058-2010) | TA1 | M (Annealing status) | ≥240 | -- | ≥24 | |
| TA2 | ≥400 | -- | ≥20 | |||
| TA3 | ≥450 | -- | ≥18 | |||
| TA9 | ≥400 | -- | ≥20 | |||
| TA10 | ≥485 | -- | ≥18 | |||
Titanium & Titanium Tube External Diameter & Permissible Variation
| Type | External Diameter | Permissible Variation | External Diameter | Permissible Variation |
| Welded Tube | ±0.30mm | |||
| Seamless Tube (GB/T3624-2010) | 3-10 | ±0.15 | >50-80 | ±0.65 |
| >10-30 | ±0.30 | >80-100 | ±0.75 | |
| >30-50 | ±0.50 | >100 | ±0.85 | |
| Seamless Tube (GB/T26058-2010) | 25-70 | ±1.0 | >150-170 | ±2.5 |
| >70-100 | ±1.2 | >170-200 | ±3.0 | |
| >100-120 | ±1.5 | >200-210 | ±3.5 | |
| >120-150 | ±2.0 |  |  | |
Titanium & Titanium Tube Wall thickness Permissible Variation
| Type | Wall Thickness | Permissible Variation | Wall Thickness | Permissible Variation |
| Welded Tube | Standard Tube Wall ±10% | |||
| Seamless Tube (GB/T3624-2010) | Standard Tube Wall ±12.5% | |||
| Seamless Tube (GB/T26058-2010) | 4,5,6 | +1.5/-1.0 | 12,15,18,20 | +2.5/-1.5 |
| 7,8,9,10 | +2.0/-1.0 | 22,25,28,30 | +3.0/-2.0 | |
Â
Â
Titanium & Titanium Alloy Tube Material Cut
| Type | External Diameter | Material Cut , Not More Than |
| Welded Tube | >10-30 | 2 |
| >30-38 | 3 | |
| Seamless Tube (GB/T3624-2010) | ≤30 | 2 |
| >30-60 | 3 | |
| >60-110 | 4 | |
| Seamless Tube (GB/T26058-2010) | 25-50 | 3 |
| >50-100 | 4 | |
| >100-210 | 5 |
Â
Â
Â
Â
Signup today to claim your Discount. Get Started before it's too late!
