Titanium plate is under standard of ASTM B265, ASTM F136, ASTM F67, AMS 4928,etc. The grade includes Gr1,Gr2,Gr3,Gr5,Gr7,Gr12 and more. Types of the plate can divided into pure titanium plate, kinds of titanium alloy plate, hot rolled titanium plate, cold rolled titanium plate, plate for piping, medical purpose titanium plate, anode plate and cathode plate, etc. Surface treatment includes sandblasted, black oxide and acid washing for option. The thickness of the plate is from 0.50mm to 70mm, and we normally hold in stock from thickness 1.00mm to 60mm. Besides standard model, you can order for custom size.
Chemical 1.mm)
No. | Chemical Composition | Ti | Main Composition | Impurity (not more than. %) | ||||||
Fe | C | N | H | O | Other > | |||||
Single | Total | |||||||||
TA1 | Industrial Pure Titanium | Allowance | Ti | 0.2 | 0.08 | 0.03 | 0.015 | 0.18 | 0.1 | 0.4 |
TA2 | Industrial Pure Titanium | Allowance | Ti | 0.2 | 0.08 | 0.03 | 0.015 | 0.25 | 0.1 | 0.4 |
TA10 | Ti-0.3Mo-0.8Ni | Allowance | Mo=0.2-0.4 Ni=0.6-0.9 | 0.2 | 0.08 | 0.03 | 0.015 | 0.25 | 0.1 | 0.4 |
TC4 | Ti-6Ai-4V | Allowance | Ai=5.5-6.75 V=3.5-4.5 | 0.2 | 0.08 | 0.03 | 0.015 | 0.2 | 0.1 | 0.4 |
Thickness Permissible Variation
Thickness | Width | ||
400-1000 | >1000-2000 | >2000 | |
>3.0-4.0 | ±0.22 | -- | -- |
>4.0-6.0 | ±0.35 | ±0.40 | -- |
>6.0-8.0 | ±0.40 | ±0.60 | ±0.80 |
>8.0-10.0 | ±0.50 | ±0.60 | ±0.80 |
>10.0-15.0 | ±0.70 | ±0.80 | ±1.00 |
>15.0-20.0 | ±0.70 | ±0.90 | ±1.10 |
>20.0-30.0 | ±0.90 | ±1.00 | ±1.20 |
>30.0-40.0 | ±1.10 | ±1.20 | ±1.50 |
>40.0-50.0 | ±1.20 | ±1.50 | ±2.00 |
>50.0-60.0 | ±1.60 | ±2.00 | ±2.50 |
Width & Length Permissible Variation ()
Thickness | Width | Width Permissible Variation | Length | Length Permissible Variation |
0.3-4.0 | 400-1000 | 10 | 1000-3000 | 15 |
0 | 0 | |||
>4.0-20.0 | 400-3000 | 15 | 1000-4000 | 20 |
0 | 0 | |||
>20.0-60.0 | 400-3000 | 20 | 1000-4000 | 25 |
0 | 0 |
Sheet Unevenness (GB/T3621. Mm/m)
Thickness/mm | Specified Unevenness/ (mm/m) | |
â¤2000 | >2000 | |
â¤4 | 20 | -- |
>4-10 | 18 | 20 |
>10-20 | 15 | 18 |
>20-35 | 13 | 15 |
>35-60 | 8 | 13 |
Room Temperature Mechanical Properties
Model | Status | Plate Thickness /mm | Tensile Strength Rm/Mpa | Specified non-proportional extension Strength Rp0.2/Mpa | Break Elongation A/%,⥠|
TA1 | M | 0.3-25 | â¥240 | 140-310 | 30 |
TA2 | M | 0.3-25 | â¥400 | 275-450 | 25 |
TA10 (A series) | M | 0.8-10.0 | â¥485 | â¥345 | 18 |
TC4 | M | 0.8-2.0 | â¥895 | â¥830 | 12 |
M | >2.0-5.0 | â¥895 | â¥830 | 10 | |
M | >5.0-10.0 | â¥895 | â¥830 | 10 | |
M | 10.0-25.0 | â¥895 | â¥830 | 8 |
Bended Diameter & Bended Angle (GB/T3621)
Model | Status | Plate Thickness/mm | Bended Diameter | Angle Of bend (a/Degree) |
TA1 | M | <18 | 3T | 105 |
1.8-4.75 | 4T | |||
TA2 | M | <1.8 | 4T | |
1.8-4.75 | 5T | |||
TA10 | M | <1.8 | 4T | |
1.8-4.75 | 5T | |||
TC4 | M | <1.8 | 9T | |
1.8-4.75 | 10T |