Diffuser Sheet for UGR Solution
Diffuser sheet
1. Prism Cone UGR diffuser with Concave hexagon,cone bottom,takes on homogeneous look due to unidirectional structure;
2. Scientific designed structure,well defined lamp direction with average beam angle 85 degree,assist to improve the light efficiency and reasonable glare suppression;
3. Homogeneous glare reduction in all C-levels,exnt for workstations required lighting application UGR<19,for example LED Panel light;
4. On equal conditions, the light transmittance is obvious higher than traditional matte or orange peel texture diffusion sheet, at the same time effectively suppress the glare value.
Product Details
Dimensionï¼L*W*Tï¼ | |||
Length | width | Thickness |
|
1200mm | 1200mm | 1.5mm |
|
Pattern | Concave hexagon,cone bottom |
| |
Note: according to customer demand for different mold, build the required size |
Temperature range:
A.storage temperatureï¼25â±10ã
B.Long term use environment temperatureï¼0~80â
C.relative air humidityï¼45%~75%ã
|
Item | Test Method | Unit | PMMA |
transmission rate | Transmissometer | % | 92% |
Haze | Transmissometer | % | 80% |
water adsorption | ASTM D570-98 | % | 0.3 |
distortion temperature | ASTM D648-07 | â | 88 |
vicat softening temperature | ASTM D1525-09 | â | 104 |
pansivity | ASTMD696 | cm/cm/â*10-5 | 7.6 |
Thermal conductivity | ASTMD177 | Cal/cm*secâ*10-4 | 4.5 |
HRR | ASTM D785-08 | - | 123 |
flammability | UL 94-1996 |
| flammability |
UGR | UGR |
| â¤19 |
Product Ingredient:PMMA, PE protection film
Scientific designed structure,well defined lamp direction with average beam angle 90 degree,assist to improve the light efficiency and reasonable glare suppression;
exnt for workstations required lighting application UGR<19,for example LED Panel light;
Attention:
In conjunction with diffusion film and light guide plate,Prism Cone diffuser positioned in outer layer with the texture facing away from the led or lamp;diffusion film located in the middle layer with the microstructure facing away from the led or lamp also; the light guide plate placed on the bottom layer with the texture side placed contrary to prisma cone and diffusion film.