Metal Seated Jacketed Ball Valve – Ask For High Temperature, Pressure and Abrasive Application
Metal Seated Jacketed Ball Valve, High Temperature Jacketed Valve Manufacturer, Metallic Seated Jacketed Valve Exporter, Stockist, Importer, Supplier.A Leading Exporter and Manufacturer of all types Industrial Valves including Metal to Metal Seated Jacketed Ball Valve.
A standard single piece design body construction with uni-directional flow and suitable for pressure up to 105 bar and temperature up to 500 deg. C depending upon size, end connection and metallurgy.
High temperature withstand capacity pure graphite packing and high quality tungsten carbide coated seat & ball materials, these valves use for heated abrasive service like bitumen, asphalt, col tar, polymer, resin which cannot be properly handled by any soft seated ball valves due to the limitation of temperature withstand capacity and mechanical properties of their soft seats (PTFE/GFT/CFT).Heavy duty rigid construction design seats with full metallic contact between ball and seats give long life of valve.
Bi-Directional flow and durable metal seat design and material also provides fully guaranteed throttling service performance.
We are Jacketed Ball Valve manufacturer in size starts from DN15 x DN 40 (1/2″ X 1-1/2″) to DN150 x DN250 (6″ x10″).
Full bore / port Metal Seated Jacketed Ball Valves are single piece construction design, provides continuous, smooth, free, straight flow characteristics with minimum pressure loss as the line flow travels through the valve bore.
Each Metal Seated Jacketed Ball Valve body construction replace by adding minimum one size higher flanges to achieve proper tighten space of bolt and nut.
As example: for Metal Seated Jacketed Ball Valve Size DN50 x DN80 (2†x 3â€), Jacketed Ball Valve has the nominal bore of DN50 (2†– 50MM) and the flange size DN80 (3†– 80MM), which allows enough space for bolting clearance after jacket fabricated (welded) on modified valve body. These types of jacketed ball valve termed as a Full Jacketed Ball Valve and due to inside metal seats called as Metal Seated Jacketed Ball Valve.
Nivz design valve body facilitate the convenience of easy maintenance for any critical application. This is an important design requirement particularly for trouble – free service of sticky, viscous or slurries fluid.
We are specialized in manufacturing of Metal To Metal Seated Jacketed Ball Valve with ISO 5211 Direct Mounting Pad body to direct mount of pneumatic / electrical actuator or gear box and Handle / Hand Lever Locking device to fix the position of valve in open or close condition.
All Metal Seated Jacketed Ball Valve available with body materials Cast Caron Steel (WCB), Cast Stainless Steel (SS304-316-304L-316L,CF8/CF8M/CF3/CF3M), Low Temperature Carbon Steel (LC1/LCB/LCC), Duplex Steel (D2205), Super Duplex Steel, Hastelloy (HC-C22/HC276), Alloy 20 (CN7M) etc.
Nivz Metallic Seated Jacketed Ball Valve face to face distance we provide as per ANSI/ASME B 16.10 standard of oversize flange size which facilitate to replace in future with any standard non jacketed valve also.
Our supplied High Temperature Jacketed Ball Valve satisfactory performing right now in a country Kingdom of Saudi Arabia, Brazil, Israel, United Arab Emirates – Dubai, Turkey, Australia, Africa, Egypt, United States of America, Oman, Malaysia, Jordan, USA – America, Malaysia, Philippines, Vietnam, Singapore, India, etc.
Signup today to claim your Discount. Get Started before it's too late!
