Introduction
Titanium and titanium alloy according to the different performance can be produced with different requirements of the wire.
Titanium Welding Wires
Titanium Flat Wire
Titanium ultra-fine wire
Titanium coiling wire
Titanium straight wire
Titanium spring wire
2. Materials & standards
Material | Gr.1,Gr.2,Gr.3,Gr.4 Gr.5(Ti-6Al4V),Gr.7(Ti-0.2Pd),Gr.9(Ti-3Al2.5V), Gr.12(Ti-0.3Mo-0.8Ni), Gr19(Ti-3Al-8V-6Cr-4Mo-4Zr), Gr.23(Ti-6Al4V-ELI) |
Standard | ASTM B863, ASTM F67, ASTM F136 |
Technique | Forging, rolling, cold drawing, hot drawing |
Condition | (M), (R), (Y) |
Specification | 1.  Diameter of wire:   ø 0.05 mm~ø7.0 mm by spool/ coil; 2.  Diameter of wire:   ø 1.0 mm~ø6.0 mm ; 3.  Diameter of wire:   ø 0.2 mm~ø7.0 mm |
Shape | Straight, Coiling, flat, |
Surface | Pickling or Polishing |
Note: Non-standard sizes are also available.
3. Characters
Lightest weight
Low density
Non-magnetic
High strength
Corrosion resistance
High thermal stability
4. Chemical Requirements
 Grade | N | C | H | Fe | O | Al | V | Pa | Mo | Ni | Cr | Zr | Pd | Ti |  |
GR 1 | 0.03 | 0.08 | 0.015 | 0.20 | 0.18 | / | / | / | / | / | / | / | / | bal | Â |
GR 2 | 0.03 | 0.08 | 0.015 | 0.30 | 0.25 | / | / | / | / | / | / | / | / | bal | Â |
GR 3 | 0.05 | 0.08 | 0.015 | 0.30 | 0.35 | / | / | / | / | / | / | / | / | bal | Â |
GR 5 | 0.05 | 0.08 | 0.015 | 0.40 | 0.20 | 5.5~6.75 | 3.5~4.5 | / | / | / | / | / | / | bal | Â |
GR 7 | 0.03 | 0.08 | 0.015 | 0.30 | 0.25 | / | / | 0.12~0.25 | / | / | / | / | / | bal | Â |
GR 9 | 0.03 | 0.08 | 0.015 | 0.25 | 0.15 | 2.5~3.5 | 2.0~3.0 | / | / | / | / | / | / | bal | Â |
GR 12 | 0.03 | 0.08 | 0.015 | 0.30 | 0.25 | / | / | / | 0.2~0.4 | 0.6~0.9 | / | / | / | bal | Â |
GR 19 | 0.03 | 0.05 | 0.03 | 0.3 | 0.14 | 3.0~4.0 | 7.5~8.5 | / | 3.5~4.5 | / | 5.5~6.5 | 3.5~4.5 | â¤0.10 | bal |  |
GR 23 | 0.03 | 0.08 | 0.012 | 0.25 | 0.13 | 5.5~6.5 | 3.5~4.5 | / | / | / | / | / | / | bal | Â |
Â