Product Description:
Copper coated grate powder is a kind of new material produced by our factory, its specific gravity is higher than grate and lower than copper, it overcomes the disadvantages of the mechanical mixing powder in the old technology, such as difficult to mix evenly and easy to form segregation due to big density difference ( copper 8.8Ã103kg/m3, grate 2.2Ã103kg/m3) and bad dispersibility of grate powder. At the same time, carbon and copper interface can only be connected by mechanical interlock, the bonding strength between the interfaces is low, which causes unstable product quality. For grate and copper of high temperature infiltration, even when the temperature is up to 1100â the wetting angle is 140°, it is very difficult for grate to form evenly suspending distribution state in copper solution, and easy to have segregation. The copper coated grate powder produced by our company is to make the grate surface to be coated with one layer of continuous copper first, so the grate distribute evenly between the copper. It is easy for copper to form three-dimensional grid structure, the interface bonding strength is high, which improves the product quality, it can be widely used as adding material in the production of motor brush, self-lubricating bearing, spray, liquid metallurgy material and so on.
Copper content:25-95ï¼
Fineness:200-800 mesh
Note: fineness and copper content can be adjusted according to customerâs requirement.
Application:
It can be used for spraying materials, liquid metallurgy materials, self-lubricating bearing, carbon brush, pantograslide plate, electrical lead frame of integrated circuit, collecting ring of the generator and other electrical parts.