Join today and be a part of the fastest growing B2B Network Join Now

Vertical Shaft Impact Crusher

  • Origin: Turkey
  • Supply Type: oem service

Supplier Info.

  • Employees Total 101-200
  • Annual Revenue US$1 Million - US$2.5 Million
VERTÄ°CAL SHAFT IMPACT CRUSHERUÄžURMAK UDK Series Vertical Shaft Impact Crushers are preferred at the last stage of the crushing and screening process. They have a high production capacity. It successfully performs to break wet, moisty and sticky materials. Moreover, such fed materials get rid of some of the water in the body with the kinetic energy that emerges when it collides with the rotor rotating at high speed. Therefore, the end material is relatively drier. Thanks to these advantages, it is highly demanded for use in the production of sand and gravel necessary for concrete and asphalt production. Depending on the design of the facility, it can be manufactured as mobile, with fixed steel legs, with fixed skid chassis or with front feed.BodyThe crusher body with welded design provides long life thanks to its high strength. As it operates at high speed, it sits on the solid chassis with wedges in order to release the vibration movement occurring in the body of the machine.Ease of MaintenanceWith the hydraulic system located next to the body, the upper body opens easily and provides a quick maintenance process. In addition, there is a control cover on the body for ease of maintenance.Feeding ChuteMounted at the place of first impact in the crusher and eases the distribution of material. This way a longlife for rotor components is provided.Rotor UnitUpper and lower plates on the rotor keeps it safe from abrasion. Also it contains three line artificial diamondsHigh productivity, Low energy consumption.Artificial diamond liners agaÅŸnst abrasionAnti-vibration wedgesHigh cubic material percentageEase of maintenance thanks to the hydraulic hoist.Ease of installationEase of operationLower noise and evironmental pollutionCLOSED ROTORClosed rotor type UDK Vertical shaft crushers are preferred for crushing all stone types and high abrasive materials.The inner surfaces of the rotor are covered with cast liner. The exit nozzles have diamonds that show high resistance to abrasion and are easy to replace.It works on the principle of "Rock on Rock", that is, hitting the stone to the stone. The material fed from the circular inlet falls on the distribution liner in the center of the rotor rotating at a very high speed. A very strong centrifugal force is applied to the material falling into it thanks to the high-speed rotational movement in the rotor.The material with a high kinetic energy is transferred to the crushing chamber with very high speeds such as 60 to 80 m / s. In this crushing chamber, the material impacts the collected material in the stonebox. This way crushing is provided and material size is reduced. This ensures that the spare part consumption is low and the efficiency of the UDK crusher is quite high.OPEN ROTOROpen rotor type UDK Vertical shaft crushers are preferred for crushing light to medium abrasive materials.Contrary to that of a closed rotor with 4 crusher pallets, the upper part is open and the inside of body is covered with steel cast linings fixed around a certain angle and distance instead of the stonebox.The fed material enters the machine with the feeding tube and falls on the distributor liner in the center of the rotor and is delivered to the crusher pallets. The pallets accelerate the material and knocks it towards the side liners. The material is broken by hitting the liner and falls into the discharge chute.
Premium Services
Tell us what you need
Girl Right
Cross Popup
Arrow 2

I Am :

Signup today to claim your Discount. Get Started before it's too late!

Arrow 1
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it. Ok