Aluminum Foil Printing Description 1. The foil needs to be plain, free from streaks, unevenness wrinkles, scratches, cracks, rust residuals, oil spots, oxidation and stains or from any other defects. 2. The end face of the foil roll should be plain, no edge warping and bruise. 3. Splices will be ultrasonically welded and well visible marked at the flange a couple of layers before the joint. Strength of the weld at the seam to be min. 80% of the foil strength. 4. The uncoiling length in the adhesion experiment: the uncoiling length is less than1.0 m. Thicknessï¼ 0.006-0.007mm Alloyï¼ 1235-O/8079-O Widthï¼ 300-1800mm Coreï¼ 76/152mm steel core Propertyï¼ tensile strength≥60MPaï¼elongation ≥1% Pineholeï¼0.006mmï¼≤500/m²,0.0063-0.0065mmï¼≤300/m²,0.007mmï¼≤200/m² Surface wetting tensionï¼ A grade
Signup today to claim your Discount. Get Started before it's too late!
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it. Ok